Re: [PATCH v2 12/19] ath11k: Datapath changes to support WCN6750

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/27/2022 11:02 AM, Kalle Valo wrote:
Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx> writes:

HAL RX descriptor for WCN6750 is same as QCN9074, so use
the DP APIs of QCN9074 for WCN6750. There is one change
wrt to REO configuration though, REO configuration for
WCN6750 is same as WCN6855; Therefore, use reo_setup()
of WCN6855 for WCN6750.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
---
  drivers/net/wireless/ath/ath11k/core.c |  1 +
  drivers/net/wireless/ath/ath11k/hw.c   | 31 +++++++++++++++++++++++++++++++
  2 files changed, 32 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 347131a..f65347c 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -458,6 +458,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
  		.num_vdevs = 16 + 1,
  		.num_peers = 512,
  		.supports_suspend = false,
+		.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),

You mention nothing about this change in the commit log, I'll add that.


I did mention that "HAL RX descriptor for WCN6750 is same as QCN9074", you were looking at something specific?

Thanks,
Manikanta



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux