Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx> writes:
> On 4/27/2022 11:02 AM, Kalle Valo wrote:
>> Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx> writes:
>>
>>> HAL RX descriptor for WCN6750 is same as QCN9074, so use
>>> the DP APIs of QCN9074 for WCN6750. There is one change
>>> wrt to REO configuration though, REO configuration for
>>> WCN6750 is same as WCN6855; Therefore, use reo_setup()
>>> of WCN6855 for WCN6750.
>>>
>>> Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
>>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
>>> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
>>> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
>>>
>>> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
>>> ---
>>> drivers/net/wireless/ath/ath11k/core.c | 1 +
>>> drivers/net/wireless/ath/ath11k/hw.c | 31 +++++++++++++++++++++++++++++++
>>> 2 files changed, 32 insertions(+)
>>>
>>> diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
>>> index 347131a..f65347c 100644
>>> --- a/drivers/net/wireless/ath/ath11k/core.c
>>> +++ b/drivers/net/wireless/ath/ath11k/core.c
>>> @@ -458,6 +458,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>>> .num_vdevs = 16 + 1,
>>> .num_peers = 512,
>>> .supports_suspend = false,
>>> + .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
>>
>> You mention nothing about this change in the commit log, I'll add that.
>>
>
> I did mention that "HAL RX descriptor for WCN6750 is same as QCN9074",
> you were looking at something specific?
If I'm understanding correctly, by accident hal_desc_sz was not
initialised for qcn9074. If that's the case, it would be good to mention
that in the commit log.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
