On 25/04/2022 18:26, Biju Das wrote: >> >> What do you mean "ok"? I said "clk-[0-9]", so "clk-0", "clk-1", "clk-2" >> and so on. No specific prefix. > > Ah ok. > > As you mentioned above "generic part is "clk". You add specific audio/audio-X prefix > or suffix" > > So based on that, I thought "clk" is generic part and "-1-audio" as suffix, "clk-1-audio" > should be acceptable. > > For eg:- If I plan to match the label name with the hardware manual(audio_clk1), Labels are not restricted (except using [a-z0-9_], no dashes), so it is perfectly fine. > > then, as per the discussion we have, the node names should be > > either > > "audio_clk1: clk-0" > > or > > "audio_clk1: clk-1" > > Or > > "audio_clk1: audio1-clk" > > Correct? Yes, correct. Best regards, Krzysztof
