Hi Bjorn,
On Wed, 20 Apr 2022 at 08:26, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> On Thu 14 Apr 16:31 CDT 2022, Bhupesh Sharma wrote:
>
> > Add support for SDC2 which can be used to interface uSD card.
> >
> > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Cc: Rob Herring <robh@xxxxxxxxxx>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
>
> Thanks for the patch Bhupesh. I have already applied v1 though. Can you
> please double check linux-next to confirm that things are in order?
Sure, I will send a minor iommu sid related fix shortly as a separate
patch, which
is required to fix a ADMA error while using the microSD card on the ADP board
(after rebasing it to linux-next/master tip).
Regards,
Bhupesh
> > ---
> > arch/arm64/boot/dts/qcom/sm8150.dtsi | 45 ++++++++++++++++++++++++++++
> > 1 file changed, 45 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > index 15f3bf2e7ea0..0fecebf0a473 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > @@ -3270,6 +3270,51 @@ usb_2_ssphy: phy@88eb200 {
> > };
> > };
> >
> > + sdhc_2: sdhci@8804000 {
> > + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
> > + reg = <0 0x08804000 0 0x1000>;
> > +
> > + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "hc_irq", "pwr_irq";
> > +
> > + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> > + <&gcc GCC_SDCC2_APPS_CLK>,
> > + <&rpmhcc RPMH_CXO_CLK>;
> > + clock-names = "iface", "core", "xo";
> > + iommus = <&apps_smmu 0x6a0 0x0>;
> > + qcom,dll-config = <0x0007642c>;
> > + qcom,ddr-config = <0x80040868>;
> > + power-domains = <&rpmhpd 0>;
> > + operating-points-v2 = <&sdhc2_opp_table>;
> > +
> > + status = "disabled";
> > +
> > + sdhc2_opp_table: sdhc2-opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-19200000 {
> > + opp-hz = /bits/ 64 <19200000>;
> > + required-opps = <&rpmhpd_opp_min_svs>;
> > + };
> > +
> > + opp-50000000 {
> > + opp-hz = /bits/ 64 <50000000>;
> > + required-opps = <&rpmhpd_opp_low_svs>;
> > + };
> > +
> > + opp-100000000 {
> > + opp-hz = /bits/ 64 <100000000>;
> > + required-opps = <&rpmhpd_opp_svs>;
> > + };
> > +
> > + opp-202000000 {
> > + opp-hz = /bits/ 64 <202000000>;
> > + required-opps = <&rpmhpd_opp_svs_l1>;
> > + };
> > + };
> > + };
> > +
> > dc_noc: interconnect@9160000 {
> > compatible = "qcom,sm8150-dc-noc";
> > reg = <0 0x09160000 0 0x3200>;
> > --
> > 2.35.1
> >
