The initial introduction of the jabil server with AST2600 BMC SoC.
Signed-off-by: David Wang <David_Wang6097@xxxxxxxxx>
---
.../boot/dts/aspeed-bmc-jabil-rubypass.dts | 383 ++++++++++++++++++
1 file changed, 383 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-jabil-rubypass.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-jabil-rubypass.dts b/arch/arm/boot/dts/aspeed-bmc-jabil-rubypass.dts
new file mode 100644
index 000000000000..80763ff48b2a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-jabil-rubypass.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Jabil Boy";
+ compatible = "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ bootargs = "console=ttyS4,115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ identify {
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ status_amber {
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ status_green {
+ default-state = "keep";
+ gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ status_susack {
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(V, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ fan1_fault{
+ default-state = "off";
+ gpios = <&gpio3_71 0 GPIO_ACTIVE_HIGH>;
+ };
+ fan2_fault{
+ default-state = "off"
+ };
+ fan3_fault{
+ default-state = "off";
+ gpios = <&gpio3_71 2 GPIO_ACTIVE_HIGH>;
+ };
+ fan4_fault{
+ default-state = "off";
+ gpios = <&gpio3_71 3 GPIO_ACTIVE_HIGH>;
+ };
+ fan5_fault{
+ default-state = "off";
+ gpios = <&gpio3_71 4 GPIO_ACTIVE_HIGH>;
+ };
+ fan6_fault{
+ default-state = "off";
+ gpios = <&gpio3_71 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber {
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mdio2 {
+ status = "okay";
+
+ ethphy2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mdio3 {
+ status = "okay";
+
+ ethphy3: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac0 {
+ status = "okay";
+
+ phy-mode = "rgmii-rxid";
+ phy-handle = <ðphy0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+
+&mac1 {
+ status = "okay";
+
+ phy-mode = "rgmii-rxid";
+ phy-handle = <ðphy1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ non-removable;
+ bus-width = <4>;
+ max-frequency = <100000000>;
+ clk-phase-mmc-hs200 = <9>, <225>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default
+ &pinctrl_nrts2_default
+ &pinctrl_ndtr2_default
+ &pinctrl_ndsr2_default
+ &pinctrl_ncts2_default
+ &pinctrl_ndcd2_default
+ &pinctrl_nri2_default>;
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+
+&uart5 {
+ // Workaround for A0
+ compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+ status = "okay";
+
+ temp@2e {
+ compatible = "adi,adt7490";
+ reg = <0x2e>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ multi-master;
+ status = "okay";
+
+ gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(O, 7) IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "FAN1_PRSNT_N", "FAN2_PRSNT_N", "FAN3_PRSNT_N", "FAN4_PRSNT_N",
+ "FAN5_PRSNT_N", "FAN6_PRSNT_N", "FANCTRL1_FANFAIL_N", "FANCTRL2_FANFAIL_N";
+ };
+
+ gpio3_71:gpio@71 {
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "LED_FAN1_FAULT", "LED_FAN2_FAULT", "LED_FAN3_FAULT", "LED_FAN4_FAULT",
+ "LED_FAN5_FAULT", "LED_FAN6_FAULT", "PU_U12_IO6", "PU_U12_IO7";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&fsim0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&sdc {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+ /* Enable GPIOP0 and GPIOP2 pass-through by default */
+ /* pinctrl-names = "pass-through"; */
+ /* pinctrl-0 = <&pinctrl_thru0_default */
+ /* &pinctrl_thru1_default>; */
+
+ gpio-line-names =
+ /*A0-A7*/ "SMB_DCSCM_I2C2_R_SCL","SMB_DCSCM_I2C2_R_SDA","TP_GPIOA2","TP_GPIOA3","SMB_CPU_PIROM_R_SCL","SMB_CPU_PIROM_R_SDA","SMB_IPMB_STBY_LVC3_R_SCL","SMB_IPMB_STBY_LVC3_R_SDA",
+ /*B0-B7*/ "NCSI_BMC_I210_NCSI_PRSNT_N","NMI_OUT","IRQ_SMB3_M2_ALERT_N","FM_SPD_SWITCH_CTRL_N","RGMII_BMC_RMM4_LVC3_R_MDC","RGMII_BMC_RMM4_LVC3_R_MDIO","FM_BMC_BMCINIT_R","FP_ID_LED_N",
+ /*C0-C7*/ "","RMII_BMC_I210_TXEN_R","RMII_BMC_I210_TXD0_R","RMII_BMC_I210_TXD1_R","","","CLK_50M_BMC_MAC3_NCSI","",
+ /*D0-D7*/ "RMII_BMC_I210_RXD0","RMII_BMC_I210_RXD1","RMII_BMC_I210_CRSDV","RMII_BMC_I210_RXER","","RMII_BMC_OCP3_A_TXEN_R","RMII_BMC_OCP3_A_TXD0_R","RMII_BMC_OCP3_A_TXD1_R",
+ /*E0-E7*/ "","","CLK_50M_BMC_MAC4_NCSI","","RMII_BMC_OCP3_A_RXD0","RMII_BMC_OCP3_A_RXD1","RMII_BMC_OCP3_A_CRSDV","RMII_BMC_OCP3_A_RXER",
+ /*F0-F7*/ "","","","","","","ID_BUTTON","PS_PWROK",
+ /*G0-G7*/ "FM_SMB_BMC_NVME_LVC3_ALERT_N","RST_BMC_I2C_M2_R_N","FP_LED_STATUS_GREEN_N","FP_LED_STATUS_AMBER_N","FM_FORCE_BMC_UPDATE_N","FM_BMC_CRASHLOG_TRIG_N","FM_BMC_CPU_FBRK_OUT_R_N","DBP_PRESENT_IN_R2_N",
+ /*H0-H7*/ "SGPIO_BMC_FPGA_CLK_R","SGPIO_BMC_FPGA_LD_R_N","SGPIO_BMC_FPGA_DOUT_R","SGPIO_BMC_FPGA_DIN","PLTRST_N","CPU_CATERR","PCH_BMC_THERMTRIP","FM_CPU1_CATERR_N",
+ /*I0-I7*/ "JTAG_ASD_NTRST_R_N","JTAG_ASD_TDI_R","JTAG_ASD_TCK_R","JTAG_ASD_TMS_R","JTAG_ASD_TDO","FM_BMC_PWRBTN_OUT_R_N","FM_BMC_PWR_BTN_PTHRU_N","TP_FM_BMC_PCH_SCI_R_N",
+ /*J0-J7*/ "SMB_CHASSENSOR_STBY_LVC3_SCL","SMB_CHASSENSOR_STBY_LVC3_SDA","SMB_FPGA_REG_R_SCL","SMB_FPGA_REG_R_SDA","SMB_DCSCM_I2C12_R_SCL","SMB_DCSCM_I2C12_R_SDA","SMB_BMC_FAN_STBY_LVC3_R_SCL","SMB_BMC_FAN_STBY_LVC3_R_SDA",
+ /*K0-K7*/ "SMB_HSBP_STBY_LVC3_R_SCL","SMB_HSBP_STBY_LVC3_R_SDA","SMB_SMLINK0_STBY_LVC3_R2_SCL","SMB_SMLINK0_STBY_LVC3_R2_SDA","SMB_TEMPSENSOR_STBY_LVC3_R_SCL","SMB_TEMPSENSOR_STBY_LVC3_R_SDA","SMB_PMBUS_SML1_STBY_LVC3_R_SCL","SMB_PMBUS_SML1_STBY_LVC3_R_SDA",
+ /*L0-L7*/ "SMB_PCIE_STBY_LVC3_R_SCL","SMB_PCIE_STBY_LVC3_R_SDA","SMB_HOST_STBY_BMC_LVC3_R_SCL","SMB_HOST_STBY_BMC_LVC3_R_SDA","PREQ_N","TCK_MUX_SEL","","",
+ /*M0-M7*/ "TP_SPA_CTS_N","TP_SPA_DCD_N","TP_SPA_DSR_N","PU_SPA_RI_N","TP_SPA_DTR_N","TP_SPA_RTS_N","SPA_SOUT","SPA_SIN",
+ /*N0-N7*/ "TP_SPB_CTS_N","TP_SPB_DCD_N","TP_SPB_DSR_N","PU_SPB_RI_N","TP_SPB_DTR_N","TP_SPB_RTS_N","UART_BMC_TXD2","UART_BMC_RXD2",
+ /*O0-O7*/ "BMC_FPGA_GPIO_0","BMC_FPGA_GPIO_1","BMC_FPGA_GPIO_2","BMC_FPGA_GPIO_3","FM_BMC_PCH_SPARE_R","FM_CPU1_DISABLE_COD_N","NMI_BUTTON","PDB_PCA9538_INT_N",
+ /*P0-P7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","DISPLAYPORT_MUX_AUX_R_SEL","BMC_HBLED_N",
+ /*Q0-Q7*/ "TP_BMC_FAN1_A_TACH","TP_BMC_FAN1_B_TACH","TP_BMC_FAN2_A_TACH","TP_BMC_FAN2_B_TACH","TP_BMC_FAN3_A_TACH","TP_BMC_FAN3_B_TACH","TP_BMC_FAN4_A_TACH","TP_BMC_FAN4_B_TACH",
+ /*R0-R7*/ "","","","","","FPGA_JTAG_MUX_SEL","DISPLAYPORT_MUX_R_OE","DISPLAYPORT_MUX_DX_R_SEL",
+ /*S0-S7*/ "RST_BMC_PCIE_MUX_N","BMC_RST_RTCRST_R","PRDY_N","FM_FLASH_SECURITY_STRAP","RST_IPMB_SWITCH_R_N","A_P3V_BAT_SCALED_EN","REMOTE_DEBUG_ENABLE","FM_PCHHOT_N",
+ /*T0-T7*/ "GND","GND","GND","GND","GND","GND","GND","GND",
+ /*U0-U7*/ "GND","GND","GND","GND","GND","GND","GND","GND",
+ /*V0-V7*/ "SIO_S3","SIO_S5","TP_BMC_SIO_PWREQ_N","SIO_ONCONTROL","SIO_POWER_GOOD","LED_BMC_FW_CONFIG_DONE_N","FM_BMC_SUSACK_N","TP_IRQ_BMC_PCH_SMI_LPC_N_R",
+ /*W0-W7*/ "ESPI_IO0_LPC_LAD0_R","ESPI_IO1_LPC_LAD1_R","ESPI_IO2_LPC_LAD2_R","ESPI_IO3_LPC_LAD3_R","CLK_24M_66M_LPC0_ESPI_BMC","ESPI_CS0_N_LFRAME_N_BMC","IRQ_LPC_SERIRQ_ESPI_ALERT_N","RST_LPC_LRST_ESPI_RST_BMC_R_N",
+ /*X0-X7*/ "CPU_ERR2","SMI","POST_COMPLETE","TP_SPI_BMC_SAFS_R_CLK","TP_SPI_BMC_SAFS_R_MOSI","TP_SPI_BMC_SAFS_R_MISO","TP_SPI_BMC_SAFS_R_IO2","TP_SPI_BMC_SAFS_R_IO3",
+ /*Y0-Y7*/ "BMC_PWR_AMB_LED_R_N","IRQ_SML0_ALERT_BMC_R2_N","JTAG_CPLD_BMC_MUX_R_SEL","IRQ_SML1_PMBUS_BMC_ALERT_N","SPI_BMC_BOOT_R_IO2","SPI_BMC_BOOT_R_IO3","PU_SPI_BMC_BOOT_ABR","PU_SPI_BMC_BOOT_WP_N",
+ /*Z0-Z7*/ "CPU_ERR0","CPU_ERR1","PU_TP_PWRGD_P3V3_RISER2","PU_GPIOZ3","PU_GPIOZ4","PU_GPIOZ5","PU_GPIOZ6","PU_GPIOZ7";
+};
+
+&gpio1 {
+ status = "okay";
+ gpio-line-names = /* GPIO18 A-E */
+ /*A0-A7*/ "TP_GPIO18B5","TP_GPIO18B4","RST_EMMC_BMC_R_N","","","","","",
+ /*B0-B7*/ "","","PD_GPIOB2","","RGMII_BMC_RMM4_TX_R_CLK","RGMII_BMC_RMM4_TX_R_CTRL","RGMII_BMC_RMM4_R_TXD0","RGMII_BMC_RMM4_R_TXD1",
+ /*C0-C7*/ "RGMII_BMC_RMM4_R_TXD2","RGMII_BMC_RMM4_R_TXD3","RGMII_BMC_RMM4_RX_CLK","RGMII_BMC_RMM4_RX_CTRL","RGMII_BMC_RMM4_RXD0","RGMII_BMC_RMM4_RXD1","RGMII_BMC_RMM4_RXD2","RGMII_BMC_RMM4_RXD3",
+ /*D0-D7*/ "EMMC_BMC_R_CLK","EMMC_BMC_R_CMD","EMMC_BMC_R_DATA0","EMMC_BMC_R_DATA1","EMMC_BMC_R_DATA2","EMMC_BMC_R_DATA3","EMMC_BMC_CD_N","EMMC_BMC_WP_N",
+ /*E0-E3*/ "EMMC_BMC_R_DATA4","EMMC_BMC_R_DATA5","EMMC_BMC_R_DATA6","EMMC_BMC_R_DATA7";
+};
+
+&lpc_snoop {
+ snoop-ports = <0x80>;
+ status = "okay";
+};
+
--
2.30.2
