Re: [PATCH v1 3/4] arm64: dts: Add aqp8039-t2 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/04/2022 03:09, Bryan O'Donoghue wrote:
> The apq8039-t2 is an apq8039/msm8939 based board paired with a wcn3680b
> WiFi chipset.
> 
> Co-developed-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> Co-developed-by: Jun Nie <jun.nie@xxxxxxxxxx>
> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> Co-developed-by: Benjamin Li <benl@xxxxxxxxxxxx>
> Signed-off-by: Benjamin Li <benl@xxxxxxxxxxxx>
> Co-developed-by: James Willcox <jwillcox@xxxxxxxxxxxx>
> Signed-off-by: James Willcox <jwillcox@xxxxxxxxxxxx>
> Co-developed-by: Leo Yan <leo.yan@xxxxxxxxxx>
> Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> Co-developed-by: Joseph Gates <jgates@xxxxxxxxxxxx>
> Signed-off-by: Joseph Gates <jgates@xxxxxxxxxxxx>
> Co-developed-by: Max Chen <mchen@xxxxxxxxxxxx>
> Signed-off-by: Max Chen <mchen@xxxxxxxxxxxx>
> Co-developed-by: Zac Crosby <zac@xxxxxxxxxxxx>
> Signed-off-by: Zac Crosby <zac@xxxxxxxxxxxx>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---

(...)

> +	pinctrl_panel: panel {
> +		pinmux {
> +			pins = "gpio25";
> +			function = "gpio";
> +		};
> +	};
> +
> +	msmgpio_spe_reg: msmgpio_spe_reg {

Same comments as for your patch 2.

> +		pinmux {
> +			pins = "gpio108";
> +			function = "gpio";
> +			output-high;
> +		};
> +	};

(...)

> +	lcd_iovcc_vreg: lcd-iovcc-vreg {

Generic node names, so if you need some specific prefix, at least follow
it with "regulator", so "lcd-iovcc-regulator"

> +		compatible = "regulator-fixed";
> +		regulator-name = "lcd_iovcc";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_lcd_iovcc>;
> +		gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <300>;
> +		enable-active-high;
> +	};
> +
> +	lcd_avdd_vreg: lcd-avdd-vreg {
> +		compatible = "regulator-fixed";
> +		regulator-name = "lcd_avdd";
> +		regulator-min-microvolt = <5600000>;
> +		regulator-max-microvolt = <5600000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_lcd_avdd>;
> +		gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <300>;
> +		enable-active-high;
> +	};
> +
> +	lcd_avee_vreg: lcd-avee-vreg {
> +		compatible = "regulator-fixed";
> +		regulator-name = "lcd_avee";
> +		regulator-min-microvolt = <5600000>;
> +		regulator-max-microvolt = <5600000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_lcd_avee>;
> +		gpios = <&msmgpio 87 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <300>;
> +		enable-active-high;
> +	};
> +
> +	bl: backlight {
> +		compatible = "gpio-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_backlight>;
> +		gpios = <&msmgpio 98 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	pp_spe_3v3_vreg: pp_spe_3v3_vreg {

Please apply all comments from patch 2.

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux