RE: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Thanks for the feedback.

> Subject: Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L
> MIPI DSI TX bindings
> 
> Hi Biju,
> 
> Thank you for the patch.
> 
> On Mon, Mar 28, 2022 at 07:49:30AM +0100, Biju Das wrote:
> > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's.
> > It can operate in DSI mode, with up to four data lanes.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > v1->v2:
> >  * Added full path for dsi-controller.yaml
> >  * Modeled DSI + D-PHY as single block and updated reg property
> >  * Fixed typo D_PHY->D-PHY
> >  * Updated description
> >  * Added interrupts and interrupt-names and updated the example
> > RFC->v1:
> >  * Added a ref to dsi-controller.yaml.
> > RFC:-
> >  *
> > ---
> >  .../bindings/display/bridge/renesas,dsi.yaml  | 175
> > ++++++++++++++++++
> >  1 file changed, 175 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > new file mode 100644
> > index 000000000000..eebbf617c484
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yam
> > +++ l
> > @@ -0,0 +1,175 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> >
> > +
> > +title: Renesas RZ/G2L MIPI DSI Encoder
> > +
> > +maintainers:
> > +  - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > +
> > +description: |
> > +  This binding describes the MIPI DSI encoder embedded in the Renesas
> > +  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode,
> > +with
> > +  up to four data lanes.
> > +
> > +allOf:
> > +  - $ref: /schemas/display/dsi-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    items:
> > +      - description: Sequence operation channel 0 interrupt
> > +      - description: Sequence operation channel 1 interrupt
> > +      - description: Video-Input operation channel 1 interrupt
> > +      - description: DSI Packet Receive interrupt
> > +      - description: DSI Fatal Error interrupt
> > +      - description: DSI D-PHY PPI interrupt
> > +      - description: Debug interrupt
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: seq0
> > +      - const: seq1
> > +      - const: vin1
> > +      - const: rcv
> > +      - const: ferr
> > +      - const: ppi
> > +      - const: debug
> > +
> > +  clocks:
> > +    items:
> > +      - description: DSI D-PHY PLL multiplied clock
> > +      - description: DSI D-PHY system clock
> > +      - description: DSI AXI bus clock
> > +      - description: DSI Register access clock
> > +      - description: DSI Video clock
> > +      - description: DSI D-PHY Escape mode Receive clock
> 
> Isn't this the escape mode *transmit* clock ?

Yep, There is a mismatch between clk document and hardware manual. 
I have reported this issue to HW team for fixing the clk document.

> 
> > +
> > +  clock-names:
> > +    items:
> > +      - const: pllclk
> > +      - const: sysclk
> > +      - const: aclk
> > +      - const: pclk
> > +      - const: vclk
> > +      - const: lpclk
> > +
> > +  resets:
> > +    items:
> > +      - description: MIPI_DSI_CMN_RSTB
> > +      - description: MIPI_DSI_ARESET_N
> > +      - description: MIPI_DSI_PRESET_N
> > +
> > +  reset-names:
> > +    items:
> > +      - const: rst
> > +      - const: arst
> > +      - const: prst
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Parallel input port
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: DSI output port
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: /schemas/media/video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> 
> You should specify the acceptable values, especially given that the
> hardware doesn't seem to support lane reordering.

OK.

> 
> > +
> > +            required:
> > +              - data-lanes
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-names
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - reset-names
> > +  - power-domains
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> 
> Could you please swap those two lines to get them sorted alphabetically ?

OK.

Cheers,
Biju

> 
> With these comments addressed,
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
> > +
> > +    dsi0: dsi@10850000 {
> > +        compatible = "renesas,rzg2l-mipi-dsi";
> > +        reg = <0x10850000 0x20000>;
> > +        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-names = "seq0", "seq1", "vin1", "rcv",
> > +                          "ferr", "ppi", "debug";
> > +        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> > +        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk",
> "lpclk";
> > +        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> > +                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> > +                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> > +        reset-names = "rst", "arst", "prst";
> > +        power-domains = <&cpg>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +                dsi0_in: endpoint {
> > +                    remote-endpoint = <&du_out_dsi0>;
> > +                };
> > +            };
> > +
> > +            port@1 {
> > +                reg = <1>;
> > +                dsi0_out: endpoint {
> > +                    data-lanes = <1 2 3 4>;
> > +                    remote-endpoint = <&adv7535_in>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +...
> 
> --
> Regards,
> 
> Laurent Pinchart




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux