Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

Thank you for the patch.

On Mon, Mar 28, 2022 at 07:49:30AM +0100, Biju Das wrote:
> The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It
> can operate in DSI mode, with up to four data lanes.
> 
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v1->v2:
>  * Added full path for dsi-controller.yaml
>  * Modeled DSI + D-PHY as single block and updated reg property
>  * Fixed typo D_PHY->D-PHY
>  * Updated description
>  * Added interrupts and interrupt-names and updated the example 
> RFC->v1:
>  * Added a ref to dsi-controller.yaml.
> RFC:-
>  * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@xxxxxxxxxxxxxx/
> ---
>  .../bindings/display/bridge/renesas,dsi.yaml  | 175 ++++++++++++++++++
>  1 file changed, 175 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> new file mode 100644
> index 000000000000..eebbf617c484
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> @@ -0,0 +1,175 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L MIPI DSI Encoder
> +
> +maintainers:
> +  - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> +
> +description: |
> +  This binding describes the MIPI DSI encoder embedded in the Renesas
> +  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
> +  up to four data lanes.
> +
> +allOf:
> +  - $ref: /schemas/display/dsi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: Sequence operation channel 0 interrupt
> +      - description: Sequence operation channel 1 interrupt
> +      - description: Video-Input operation channel 1 interrupt
> +      - description: DSI Packet Receive interrupt
> +      - description: DSI Fatal Error interrupt
> +      - description: DSI D-PHY PPI interrupt
> +      - description: Debug interrupt
> +
> +  interrupt-names:
> +    items:
> +      - const: seq0
> +      - const: seq1
> +      - const: vin1
> +      - const: rcv
> +      - const: ferr
> +      - const: ppi
> +      - const: debug
> +
> +  clocks:
> +    items:
> +      - description: DSI D-PHY PLL multiplied clock
> +      - description: DSI D-PHY system clock
> +      - description: DSI AXI bus clock
> +      - description: DSI Register access clock
> +      - description: DSI Video clock
> +      - description: DSI D-PHY Escape mode Receive clock

Isn't this the escape mode *transmit* clock ?

> +
> +  clock-names:
> +    items:
> +      - const: pllclk
> +      - const: sysclk
> +      - const: aclk
> +      - const: pclk
> +      - const: vclk
> +      - const: lpclk
> +
> +  resets:
> +    items:
> +      - description: MIPI_DSI_CMN_RSTB
> +      - description: MIPI_DSI_ARESET_N
> +      - description: MIPI_DSI_PRESET_N
> +
> +  reset-names:
> +    items:
> +      - const: rst
> +      - const: arst
> +      - const: prst
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Parallel input port
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: DSI output port
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4

You should specify the acceptable values, especially given that the
hardware doesn't seem to support lane reordering.

> +
> +            required:
> +              - data-lanes
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>

Could you please swap those two lines to get them sorted alphabetically
?

With these comments addressed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +
> +    dsi0: dsi@10850000 {
> +        compatible = "renesas,rzg2l-mipi-dsi";
> +        reg = <0x10850000 0x20000>;
> +        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "seq0", "seq1", "vin1", "rcv",
> +                          "ferr", "ppi", "debug";
> +        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> +        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
> +        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> +                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> +                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> +        reset-names = "rst", "arst", "prst";
> +        power-domains = <&cpg>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                dsi0_in: endpoint {
> +                    remote-endpoint = <&du_out_dsi0>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                dsi0_out: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    remote-endpoint = <&adv7535_in>;
> +                };
> +            };
> +        };
> +    };
> +...

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux