MIPI-DSI devices, if they are controlled through the bus itself, have to be described as a child node of the controller they are attached to. Thus, there's no requirement on the controller having an OF-Graph output port to model the data stream: it's assumed that it would go from the parent to the child. However, some bridges controlled through the DSI bus still require an input OF-Graph port, thus requiring a controller with an OF-Graph output port. This prevents those bridges from being used with the controllers that do not have one without any particular reason to. Let's drop that requirement. Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- .../devicetree/bindings/display/bridge/chipone,icn6211.yaml | 1 - .../devicetree/bindings/display/bridge/toshiba,tc358762.yaml | 1 - 2 files changed, 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml index 62c3bd4cb28d..7257fd0ae4da 100644 --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -51,7 +51,6 @@ properties: Video port for MIPI DPI output (panel or connector). required: - - port@0 - port@1 required: diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index 5216c27fc0ad..a412a1da950f 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -39,7 +39,6 @@ properties: Video port for MIPI DPI output (panel or connector). required: - - port@0 - port@1 required: -- 2.35.1