On 2022-03-03 01:54:10, Dmitry Baryshkov wrote:
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Thanks for adding the Fixes: tag.
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index fdaf303ba047..956848068871 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 {
> power-domains = <&rpmhpd SM8250_MMCX>;
>
> interrupt-parent = <&mdss>;
> - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <0>;
>
> ports {
> #address-cells = <1>;
> @@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 {
> reg-names = "dsi_ctrl";
>
> interrupt-parent = <&mdss>;
> - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <4>;
>
> clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> @@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 {
> reg-names = "dsi_ctrl";
>
> interrupt-parent = <&mdss>;
> - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <5>;
>
> clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> --
> 2.34.1
>
