[PATCH v2 1/6] arm64: dts: qcom: msm8996: Drop flags for mdss irqs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Fixes: 12d540375736 ("arm64: dts: qcom: msm8996: Add DSI0 nodes")
Fixes: 3a4547c1fc2f ("arm64: qcom: msm8996.dtsi: Add Display nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0f81c23c16f..0597d865a4a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -788,7 +788,7 @@ mdp: mdp@901000 {
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				clocks = <&mmcc MDSS_AHB_CLK>,
 					 <&mmcc MDSS_AXI_CLK>,
@@ -834,7 +834,7 @@ dsi0: dsi@994000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_BYTE0_CLK>,
@@ -904,7 +904,7 @@ hdmi: hdmi-tx@9a0000 {
 					    "hdcp_physical";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <8>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux