On 2/19/2022 7:27 AM, Stephen Boyd wrote:
Quoting Satya Priya (2022-02-18 03:01:02)
Add base DTS file for pm8008 with infra and regulator nodes.
Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V4:
- This is newly added in V4, to add all the pm8008 common stuff.
Changes in V5:
- Changed the mfd node names from pm8008_chip to pm8008_infra and
pm8008_ldo to pm8008_regulators as they re more appropriate.
- Changed the compatible for pm8008@9 mfd node to differentiate from
pm8008@8 node in driver.
- Removed compatible for regulators node.
- Removed reg property for LDOs and added in driver.
Changes in V6:
- Changed node names to small letters.
Changes in V7:
- Removed intermediate regulators node.
arch/arm64/boot/dts/qcom/pm8008.dtsi | 44 ++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..0f48572
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2022, The Linux Foundation. All rights reserved.
+
+pm8008_infra: pm8008@8 {
Node name should be generic, pmic@8
Okay.
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
+pm8008_regulators: pm8008@9 {
Node name should be generic, pmic@9
Okay.
+ compatible = "qcom,pm8008-regulators";
+ reg = <0x9>;
+ #address-cells = <1>;
Address cells is 0 too?
Okay.
+ #size-cells = <0>;
+
+ pm8008_l1: ldo1 {
+ regulator-name = "pm8008_l1";
+ };
+
+ pm8008_l2: ldo2 {
+ regulator-name = "pm8008_l2";
+ };
+
+ pm8008_l3: ldo3 {
+ regulator-name = "pm8008_l3";
+ };
+
+ pm8008_l4: ldo4 {
+ regulator-name = "pm8008_l4";
+ };
+
+ pm8008_l5: ldo5 {
+ regulator-name = "pm8008_l5";
+ };
+
+ pm8008_l6: ldo6 {
+ regulator-name = "pm8008_l6";
+ };
+
+ pm8008_l7: ldo7 {
+ regulator-name = "pm8008_l7";
+ };
