On Fri, Feb 25, 2022 at 02:11:54PM +0100, Sascha Hauer wrote:
> On Fri, Feb 25, 2022 at 12:41:23PM +0000, Robin Murphy wrote:
> > On 2022-02-25 11:10, Dmitry Osipenko wrote:
> > > 25.02.2022 13:49, Sascha Hauer пишет:
> > > > On Fri, Feb 25, 2022 at 01:26:14PM +0300, Dmitry Osipenko wrote:
> > > > > 25.02.2022 10:51, Sascha Hauer пишет:
> > > > > > The rk3568 HDMI has an additional clock that needs to be enabled for the
> > > > > > HDMI controller to work. The purpose of that clock is not clear. It is
> > > > > > named "hclk" in the downstream driver, so use the same name.
> > > > > >
> > > > > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > > > > > ---
> > > > > >
> > > > > > Notes:
> > > > > > Changes since v5:
> > > > > > - Use devm_clk_get_optional rather than devm_clk_get
> > > > > >
> > > > > > drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++++++++++++++++
> > > > > > 1 file changed, 16 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > > > index fe4f9556239ac..c6c00e8779ab5 100644
> > > > > > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > > > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > > > @@ -76,6 +76,7 @@ struct rockchip_hdmi {
> > > > > > const struct rockchip_hdmi_chip_data *chip_data;
> > > > > > struct clk *ref_clk;
> > > > > > struct clk *grf_clk;
> > > > > > + struct clk *hclk_clk;
> > > > > > struct dw_hdmi *hdmi;
> > > > > > struct regulator *avdd_0v9;
> > > > > > struct regulator *avdd_1v8;
> > > > > > @@ -229,6 +230,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
> > > > > > return PTR_ERR(hdmi->grf_clk);
> > > > > > }
> > > > > > + hdmi->hclk_clk = devm_clk_get_optional(hdmi->dev, "hclk");
> > > > > > + if (PTR_ERR(hdmi->hclk_clk) == -EPROBE_DEFER) {
> > > > >
> > > > > Have you tried to investigate the hclk? I'm still thinking that's not
> > > > > only HDMI that needs this clock and then the hardware description
> > > > > doesn't look correct.
> > > >
> > > > I am still not sure what you mean. Yes, it's not only the HDMI that
> > > > needs this clock. The VOP2 needs it as well and the driver handles that.
> > >
> > > I'm curious whether DSI/DP also need that clock to be enabled. If they
> > > do, then you aren't modeling h/w properly AFAICS.
> >
> > Assuming nobody at Rockchip decided to make things needlessly inconsistent
> > with previous SoCs, HCLK_VOP should be the clock for the VOP's AHB slave
> > interface. Usually, if that affected anything other than accessing VOP
> > registers, indeed it would smell of something being wrong in the clock tree,
> > but in this case I'd also be suspicious of whether it might have ended up
> > clocking related GRF registers as well (either directly, or indirectly via
> > some gate that the clock driver hasn't modelled yet).
>
> Ok, I am beginning to understand. I verified that hdmi, mipi and dp are
> hanging when HCLK_VOP is disabled by disabling that clock via sysfs
> using CLOCK_ALLOW_WRITE_DEBUGFS. When it's disabled then the registers
> of that units can't be accessed. However, when I disable HCLK_VOP by
> directly writing to the gate bit RK3568_CLKGATE_CON(20) then only
> accessing VOP registers hangs, the other units stay functional.
> So it seems it must be the parent clock which must be enabled. The
> parent clock is hclk_vo. This clock should be handled as part of the
> RK3568_PD_VO power domain:
>
> power-domain@RK3568_PD_VO {
> reg = <RK3568_PD_VO>;
> clocks = <&cru HCLK_VO>,
> <&cru PCLK_VO>,
> <&cru ACLK_VOP_PRE>;
> pm_qos = <&qos_hdcp>,
> <&qos_vop_m0>,
> <&qos_vop_m1>;
> #power-domain-cells = <0>;
> };
Forget this. The clocks in this node are only enabled during enabling or
disabling the power domain, they are disabled again immediately afterwards.
OK, I need HCLK_VO to access the HDMI registers. I verified that by
disabling HCLK_VO at register level (CRU_GATE_CON(20) BIT(1)). The
HDMI registers become inaccessible then. This means I'll replace
HCLK_VOP in the HDMI node with HCLK_VO. Does this sound sane?
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
