Re: [PATCH V7 4/5] arm64: dts: qcom: pm8008: Add base dts file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Satya Priya (2022-02-18 03:01:02)
> Add base DTS file for pm8008 with infra and regulator nodes.
>
> Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
> ---
> Changes in V4:
>  - This is newly added in V4, to add all the pm8008 common stuff.
>
> Changes in V5:
>  - Changed the mfd node names from pm8008_chip to pm8008_infra and
>    pm8008_ldo to pm8008_regulators as they re more appropriate.
>  - Changed the compatible for pm8008@9 mfd node to differentiate from
>    pm8008@8 node in driver.
>  - Removed compatible for regulators node.
>  - Removed reg property for LDOs and added in driver.
>
> Changes in V6:
>  - Changed node names to small letters.
>
> Changes in V7:
>  - Removed intermediate regulators node.
>
>  arch/arm64/boot/dts/qcom/pm8008.dtsi | 44 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
> new file mode 100644
> index 0000000..0f48572
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +// Copyright (c) 2022, The Linux Foundation. All rights reserved.
> +
> +pm8008_infra: pm8008@8 {

Node name should be generic, pmic@8

> +       compatible = "qcom,pm8008";
> +       reg = <0x8>;
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +};
> +
> +pm8008_regulators: pm8008@9 {

Node name should be generic, pmic@9

> +       compatible = "qcom,pm8008-regulators";
> +       reg = <0x9>;
> +       #address-cells = <1>;

Address cells is 0 too?

> +       #size-cells = <0>;
> +
> +       pm8008_l1: ldo1 {
> +               regulator-name = "pm8008_l1";
> +       };
> +
> +       pm8008_l2: ldo2 {
> +               regulator-name = "pm8008_l2";
> +       };
> +
> +       pm8008_l3: ldo3 {
> +               regulator-name = "pm8008_l3";
> +       };
> +
> +       pm8008_l4: ldo4 {
> +               regulator-name = "pm8008_l4";
> +       };
> +
> +       pm8008_l5: ldo5 {
> +               regulator-name = "pm8008_l5";
> +       };
> +
> +       pm8008_l6: ldo6 {
> +               regulator-name = "pm8008_l6";
> +       };
> +
> +       pm8008_l7: ldo7 {
> +               regulator-name = "pm8008_l7";
> +       };
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux