Good Morning, This is my patch series that I have maintained out of tree until the combophy driver landed. Note, it is dependent on this series to function (aside from the rk3566 dwc3-otg port, which will work currently). This series is still dependent on Patch 4 of the combophy series, which has yet to be accepted. Patches 1 and 2 add the dt bindings for the grf changes necessary for this series. Patch 3 adds support to the grf driver to set the rk3566 otg clock source. Patch 4 is a downstream patch ported forward to shut down the usb3 clock when the controller is operating in usb2 mode. Patches 5 and 6 clean up the dwc3-of-simple driver and add the compatible for the rk3568. Patch 7 adds the dwc3 nodes to the rk356x device tree includes. Patch 8 enables the dwc3 nodes on the Quartz64 Model A. Please review and apply. Very Respectfully, Peter Geis Bin Yang (1): usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode Peter Geis (7): dt-bindings: soc: grf: add rk3566-pipe-grf compatible dt-bindings: usb: dwc3: add description for rk3568 soc: rockchip: set dwc3 clock for rk3566 usb: dwc3: reorder dwc-of-simple compatibles usb: dwc3: add rk3568 dwc3 support arm64: dts: rockchip: add the dwc3 usb3 nodes to rk356x arm64: dts: rockchip: enable the dwc3 nodes on quartz64-a .../devicetree/bindings/soc/rockchip/grf.yaml | 1 + .../bindings/usb/rockchip,dwc3.yaml | 7 ++- .../boot/dts/rockchip/rk3566-quartz64-a.dts | 37 +++++++++++++++ arch/arm64/boot/dts/rockchip/rk3566.dtsi | 12 +++++ arch/arm64/boot/dts/rockchip/rk3568.dtsi | 9 ++++ arch/arm64/boot/dts/rockchip/rk356x.dtsi | 45 ++++++++++++++++++- drivers/soc/rockchip/grf.c | 17 +++++++ drivers/usb/dwc3/core.c | 4 ++ drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/dwc3-of-simple.c | 10 +++-- 10 files changed, 137 insertions(+), 6 deletions(-) -- 2.25.1
