[PATCH v1 2/6] i2c: npcm: Fix timeout calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tali Perry <tali.perry1@xxxxxxxxx>

Use adap.timeout for timeout calculation instead of hard-coded
value of 35ms.
Use syscon to access gcr, instead of "compatible".

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@xxxxxxxxx>
Signed-off-by: Tyrone Ting <kfting@xxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-npcm7xx.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 2ad166355ec9..ddeee6f53621 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -2047,7 +2047,7 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	u16 nwrite, nread;
 	u8 *write_data, *read_data;
 	u8 slave_addr;
-	int timeout;
+	unsigned long timeout;
 	int ret = 0;
 	bool read_block = false;
 	bool read_PEC = false;
@@ -2099,13 +2099,13 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	 * 9: bits per transaction (including the ack/nack)
 	 */
 	timeout_usec = (2 * 9 * USEC_PER_SEC / bus->bus_freq) * (2 + nread + nwrite);
-	timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec));
+	timeout = max(bus->adap.timeout, usecs_to_jiffies(timeout_usec));
 	if (nwrite >= 32 * 1024 || nread >= 32 * 1024) {
 		dev_err(bus->dev, "i2c%d buffer too big\n", bus->num);
 		return -EINVAL;
 	}
 
-	time_left = jiffies + msecs_to_jiffies(DEFAULT_STALL_COUNT) + 1;
+	time_left = jiffies + timeout + 1;
 	do {
 		/*
 		 * we must clear slave address immediately when the bus is not
@@ -2131,7 +2131,7 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	}
 
 	npcm_i2c_init_params(bus);
-	bus->dest_addr = slave_addr;
+	bus->dest_addr = slave_addr << 1;
 	bus->msgs = msgs;
 	bus->msgs_num = num;
 	bus->cmd_err = 0;
@@ -2233,9 +2233,9 @@ static int npcm_i2c_probe_bus(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct clk *i2c_clk;
 	static struct regmap *gcr_regmap;
-	static struct regmap *clk_regmap;
 	int irq;
 	int ret;
+	struct device_node *np = pdev->dev.of_node;
 
 	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
 	if (!bus)
@@ -2250,15 +2250,11 @@ static int npcm_i2c_probe_bus(struct platform_device *pdev)
 		return PTR_ERR(i2c_clk);
 	bus->apb_clk = clk_get_rate(i2c_clk);
 
-	gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+	gcr_regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
 	if (IS_ERR(gcr_regmap))
 		return PTR_ERR(gcr_regmap);
 	regmap_write(gcr_regmap, NPCM_I2CSEGCTL, NPCM_I2CSEGCTL_INIT_VAL);
 
-	clk_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-clk");
-	if (IS_ERR(clk_regmap))
-		return PTR_ERR(clk_regmap);
-
 	bus->reg = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(bus->reg))
 		return PTR_ERR(bus->reg);
@@ -2269,7 +2265,7 @@ static int npcm_i2c_probe_bus(struct platform_device *pdev)
 	adap = &bus->adap;
 	adap->owner = THIS_MODULE;
 	adap->retries = 3;
-	adap->timeout = HZ;
+	adap->timeout = msecs_to_jiffies(35);
 	adap->algo = &npcm_i2c_algo;
 	adap->quirks = &npcm_i2c_quirks;
 	adap->algo_data = bus;
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux