Re: [PATCH v1 1/6] dt-bindings: i2c: npcm: support NPCM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob:

Thank you for your comments and they will be addressed.

Regards,
Tyrone


Rob Herring <robh@xxxxxxxxxx> 於 2022年2月12日 週六 上午12:14寫道:
>
> On Mon, Feb 07, 2022 at 02:33:33PM +0800, Tyrone Ting wrote:
> > From: Tyrone Ting <kfting@xxxxxxxxxxx>
> >
> > This commit adds compatible and syscon description for NPCM845 i2c module.
> >
> > Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
> > Signed-off-by: Tyrone Ting <kfting@xxxxxxxxxxx>
> > Signed-off-by: Tali Perry <tali.perry1@xxxxxxxxx>
> > ---
> >  .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 21 ++++++++++++++-----
> >  1 file changed, 16 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> > index 128444942aec..05e58f44b03a 100644
> > --- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> > +++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> > @@ -7,17 +7,22 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
> >  title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
> >
> >  description: |
> > -  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
> > -  both master and slave mode. Each controller can switch between master and slave
> > -  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
> > -  RX.
> > +  The NPCM7XX includes sixteen I2C bus controllers and the NPCM8XX includes
> > +  twenty-seven I2C bus controllers. NPCM8XX controllers 24-26 are connected on I2C
> > +  pins in parallel to controllers 8-10.
>
> How many instances is really outside the scope of this binding. And I
> don't want to be updating this for every new SoC. So rework it to cover
> both chips and the next one.
>
> > +  All controllers support both master and slave mode.
> > +  Each controller can switch between master and slave at run time (i.e. IPMB mode).
> > +  NPCM7XX I2C controller has two 16 byte HW FIFO for TX and RX and NPCM8XX I2C
> > +  controller has two 32 byte HW FIFO for TX and RX.
> >
> >  maintainers:
> >    - Tali Perry <tali.perry1@xxxxxxxxx>
> >
> >  properties:
> >    compatible:
> > -    const: nuvoton,npcm750-i2c
> > +    enum:
> > +      - nuvoton,npcm750-i2c
> > +      - nuvoton,npcm845-i2c
> >
> >    reg:
> >      maxItems: 1
> > @@ -36,11 +41,16 @@ properties:
> >      default: 100000
> >      enum: [100000, 400000, 1000000]
> >
> > +  syscon:
>
> nuvoton,sys-mgr or similar.
>
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +    description: The phandle of system manager register node.
> > +
> >  required:
> >    - compatible
> >    - reg
> >    - interrupts
> >    - clocks
> > +  - syscon
> >
> >  allOf:
> >    - $ref: /schemas/i2c/i2c-controller.yaml#
> > @@ -57,6 +67,7 @@ examples:
> >          clock-frequency = <100000>;
> >          interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> >          compatible = "nuvoton,npcm750-i2c";
> > +        syscon = <&gcr>;
> >      };
> >
> >  ...
> > --
> > 2.17.1
> >
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux