Re: [PATCH] dt-bindings: iio: adc: atmel,sama5d2-adc: make atmel,trigger-edge-type non-mandatory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 21 Dec 2021 14:08:58 -0400
Rob Herring <robh@xxxxxxxxxx> wrote:

> On Fri, 17 Dec 2021 11:54:01 +0200, Eugen Hristev wrote:
> > The atmel,trigger-edge-type was never imposed by the driver.
> > Make things right and remove this property from the mandatory list.
> > This will not break existing nodes because according to the binding they
> > should have this property.
> > However, the driver does not impose it and it works without it, the property
> > selects the trigger type, and without it, the driver will have no trigger
> > available, which is the case on some boards which do not have access
> > to the trigger pin.
> > This will avoid generating this warning for example:
> > 
> > */arch/arm/boot/dts/at91-sama7g5ek.dt.yaml: adc@e1000000: 'atmel,trigger-edge-type' is a required property
> >   
> 
> Acked-by: Rob Herring <robh@xxxxxxxxxx>

oops. I lost this one until doing a cleanup of patchwork.

Anyhow, now applied to the togreg branch of iio.git and pushed out as testing
for all the normal reasons.

Sorry for the delay!

Jonathan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux