x1 lane PCIe slot in the common processor board is enabled and connected to J721S2 SOM. Add PCIe DT node in common processor board to reflect the same. Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> --- .../boot/dts/ti/k3-j721s2-common-proc-board.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index cb99a97af426..793ee77838f4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -428,6 +428,20 @@ }; }; +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie1_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; + status = "disabled"; +}; + &mcu_mcan0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_mcan0_pins_default>; -- 2.17.1