Add the documentation for the Microsemi ServalT pinmuxing and gpio controller. Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> --- .../devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt index 3bb76487669f..5d84fd299ccf 100644 --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt @@ -4,8 +4,8 @@ Microsemi Ocelot pin controller Device Tree Bindings Required properties: - compatible : Should be "mscc,ocelot-pinctrl", "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl", - "mscc,luton-pinctrl", "mscc,serval-pinctrl" or - "microchip,lan966x-pinctrl" + "mscc,luton-pinctrl", "mscc,serval-pinctrl", + "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl" - reg : Address and length of the register set for the device - gpio-controller : Indicates this device is a GPIO controller - #gpio-cells : Must be 2. -- 2.33.0
