Common PHYs and network PCSes often have the possibility to specify peak-to-peak voltage on the differential pair - the default voltage sometimes needs to be changed for a particular board. Add properties `tx-p2p-microvolt` and `tx-p2p-microvolt-names` for this purpose. The second property is needed to specify the mode for the corresponding voltage in the `tx-p2p-microvolt` property, if the voltage is to be used only for speficic mode. More voltage-mode pairs can be specified. Example usage with only one voltage (it will be used for all supported PHY modes, the `tx-p2p-microvolt-names` property is not needed in this case): tx-p2p-microvolt = <915000>; Example usage with voltages for multiple modes: tx-p2p-microvolt = <915000>, <1100000>, <1200000>; tx-p2p-microvolt-names = "2500base-x", "usb", "pcie"; Add these properties into a separate file phy/transmit-amplitude.yaml, selecting it for validation if either of the `tx-p2p-microvolt`, `tx-p2p-microvolt-names` properties is set for a node. Signed-off-by: Marek Behún <kabel@xxxxxxxxxx> --- .../bindings/phy/transmit-amplitude.yaml | 110 ++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/transmit-amplitude.yaml diff --git a/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml new file mode 100644 index 000000000000..90a491b75f61 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common PHY and network PCS transmit amplitude property binding + +description: + Binding describing the peak-to-peak transmit amplitude for common PHYs + and network PCSes. + +maintainers: + - Marek Behún <kabel@xxxxxxxxxx> + +properties: + tx-p2p-microvolt: + description: + Transmit amplitude voltages in microvolts, peak-to-peak. If this property + contains multiple values for various PHY modes, the + 'tx-p2p-microvolt-names' property must be provided and contain + corresponding mode names. + + tx-p2p-microvolt-names: + description: | + Names of the modes corresponding to voltages in the 'tx-p2p-microvolt' + property. Required only if multiple voltages are provided. + + If a value of 'default' is provided, the system should use it for any PHY + mode that is otherwise not defined here. If 'default' is not provided, the + system should use manufacturer default value. + minItems: 1 + maxItems: 16 + items: + enum: + - default + + # ethernet modes + - sgmii + - qsgmii + - xgmii + - 1000base-x + - 2500base-x + - 5gbase-r + - rxaui + - xaui + - 10gbase-kr + - usxgmii + - 10gbase-r + - 25gbase-r + + # PCIe modes + - pcie + - pcie1 + - pcie2 + - pcie3 + - pcie4 + - pcie5 + - pcie6 + + # USB modes + - usb + - usb-ls + - usb-fs + - usb-hs + - usb-ss + - usb-ss+ + - usb-4 + + # storage modes + - sata + - ufs-hs + - ufs-hs-a + - ufs-hs-b + + # display modes + - lvds + - dp + - dp-rbr + - dp-hbr + - dp-hbr2 + - dp-hbr3 + - dp-uhbr-10 + - dp-uhbr-13.5 + - dp-uhbr-20 + + # camera modes + - mipi-dphy + - mipi-dphy-univ + - mipi-dphy-v2.5-univ + +dependencies: + tx-p2p-microvolt-names: [ tx-p2p-microvolt ] + +select: + anyOf: + - required: + - 'tx-p2p-microvolt' + - required: + - 'tx-p2p-microvolt-names' + +additionalProperties: true + +examples: + - | + phy: phy { + #phy-cells = <1>; + tx-p2p-microvolt = <915000>, <1100000>, <1200000>; + tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss"; + }; -- 2.34.1
