On Wed, 27 Aug 2014, Vignesh R wrote: > Number of averaging, open delay, sample delay are made DT parameters. > By decreasing averaging and delays more samples can be obtained per > second increasing performance of ADC. Previously the number of > averages per step was fixed to 16. Making these parameters > configurable will help in balancing speed vs accuracy. > For each ADC step provide DT based paramters to set open delay, > sample delay and number of averaging. One configurable step is > used per ADC channel. Since there can be atmost 8 ADC channels, > steps 16 to 8 are used for ADC. > > Signed-off-by: Vignesh R <vigneshr@xxxxxx> > --- > .../bindings/input/touchscreen/ti-tsc-adc.txt | 18 +++++++ > drivers/iio/adc/ti_am335x_adc.c | 49 +++++++++++++++++--- > include/linux/mfd/ti_am335x_tscadc.h | 3 ++ > 3 files changed, 63 insertions(+), 7 deletions(-) [...] > diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h > index fb96c84..26d3e84 100644 > --- a/include/linux/mfd/ti_am335x_tscadc.h > +++ b/include/linux/mfd/ti_am335x_tscadc.h > @@ -82,14 +82,17 @@ There are so many different formats at play here, it's difficult to see what's happening where! > #define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) > #define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) > #define STEPCONFIG_FIFO1 BIT(26) > +#define STEPCONFIG_AVG_MAX 16 > > /* Delay register */ > #define STEPDELAY_OPEN_MASK (0x3FFFF << 0) > #define STEPDELAY_OPEN(val) ((val) << 0) What's the point in shifting by zero? > #define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) > +#define STEPDELAY_OPEN_MAX 0x3FFFF Put this up the top, then you can use it when defining STEPDELAY_OPEN_MASK. > #define STEPDELAY_SAMPLE_MASK (0xFF << 24) > #define STEPDELAY_SAMPLE(val) ((val) << 24) > #define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0) > +#define STEPDELAY_SAMPLE_MAX 0xFF > /* Charge Config */ > #define STEPCHARGE_RFP_MASK (7 << 12) -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
