On Tue, 26 Aug 2014, Chris Zhong wrote:
> The RK808 chip is a power management IC for multimedia and handheld
> devices. It contains the following components:
>
> - Regulators
> - RTC
> - Clkout
>
> The RK808 core driver is registered as a platform driver and provides
> communication through I2C with the host device for the different
> components.
>
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> Signed-off-by: Zhang Qing <zhangqing@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v6:
> Adviced by Lee Jones in v2
> - rk808_i2c_client instead of g_rk808
> - remove pdata form struct rk808
>
> Changes in v5: None
> Changes in v4:
> Adviced by Lee Jones in v2
> - modify the description in Kconfig
> - remove some unnecessary header files
> - remove dev from struct rk808
> - use enum for define RK808_ID...
>
> Changes in v3:
> - fix compile err
>
> Changes in v2:
> Adviced by Mark Browm:
> - use defines for register setting value
> - remove rtc alarm disable in shutdown
> - remove while(1) in shutdown
> - remove read 0x2f in probe
>
> drivers/mfd/Kconfig | 13 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rk808.c | 257 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/rk808.h | 202 +++++++++++++++++++++++++++++++++++
> 4 files changed, 473 insertions(+)
> create mode 100644 drivers/mfd/rk808.c
> create mode 100644 include/linux/mfd/rk808.h
[...]
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> new file mode 100644
> index 0000000..f0d6518
> --- /dev/null
> +++ b/drivers/mfd/rk808.c
[...]
> +static int rk808_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int ret;
> + int pm_off = 0;
> + struct rk808 *rk808;
> + struct device_node *np = client->dev.of_node;
Are you prepared for np == NULL?
> + pm_off = of_property_read_bool(np,
> + "rockchip,system-power-controller");
Rather than have this floating up here, can you put it down where it
is used?
> + rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
> + if (!rk808)
> + return -ENOMEM;
> +
> + rk808->i2c = client;
> + i2c_set_clientdata(client, rk808);
I tend to like drive data set at the last moment. Usually just
before mfd_add_devices().
> + rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
> + if (IS_ERR(rk808->regmap)) {
> + dev_err(&client->dev, "regmap initialization failed\n");
> + return PTR_ERR(rk808->regmap);
> + }
> +
> + ret = rk808_pre_init(rk808);
> + if (ret)
> + return ret;
Does this need to be a seperate function? It's only one call to
egmap_update_bits() and is not reused.
> + if (!client->irq) {
> + dev_err(&client->dev, "No interrupt support, no core IRQ\n");
> + return -EINVAL;
> + }
If this is a show stopper, perhaps you should test for it higher up
before allocating anything else?
> + ret = regmap_add_irq_chip(rk808->regmap, client->irq,
> + IRQF_ONESHOT, -1,
> + &rk808_irq_chip, &rk808->irq_data);
> + if (ret) {
> + dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
> + return ret;
> + }
> +
> + ret = mfd_add_devices(&client->dev, -1,
> + rk808s, ARRAY_SIZE(rk808s),
> + NULL, 0, regmap_irq_get_domain(rk808->irq_data));
> + if (ret) {
> + dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
> + goto err_irq;
> + }
> +
> + if (pm_off && !pm_power_off) {
> + rk808_i2c_client = client;
> + pm_power_off = rk808_device_shutdown;
> + }
> +
> + return 0;
> +
> +err_irq:
> + regmap_del_irq_chip(client->irq, rk808->irq_data);
> + return ret;
> +}
> +
> +static int rk808_remove(struct i2c_client *client)
> +{
> + struct rk808 *rk808 = i2c_get_clientdata(client);
> +
> + regmap_del_irq_chip(client->irq, rk808->irq_data);
> + mfd_remove_devices(&client->dev);
> + pm_power_off = NULL;
'\n' here. No need to squash everything together.
> + return 0;
> +}
> +
> +static struct of_device_id rk808_of_match[] = {
> + { .compatible = "rockchip,rk808" },
> +};
> +MODULE_DEVICE_TABLE(of, rk808_of_match);
> +
> +static const struct i2c_device_id rk808_ids[] = {
> + { "rk808" },
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, rk808_ids);
My OCD senses are tingling. Either have a blank line above the calls
to MODULE_DEVICE_TABLE() or don't.
> +static struct i2c_driver rk808_i2c_driver = {
> + .driver = {
> + .name = "rk808",
> + .of_match_table = of_match_ptr(rk808_of_match),
> + },
> + .probe = rk808_probe,
> + .remove = rk808_remove,
> + .id_table = rk808_ids,
> +};
> +
> +module_i2c_driver(rk808_i2c_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Chris Zhong <zyw@xxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Zhang Qing <zhangqing@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("RK808 PMIC driver");
> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
> new file mode 100644
> index 0000000..7af1952
> --- /dev/null
> +++ b/include/linux/mfd/rk808.h
> @@ -0,0 +1,202 @@
[...]
> +struct rk808_board {
> + struct regulator_init_data *rk808_init_data[RK808_NUM_REGULATORS];
> + struct device_node *of_node[RK808_NUM_REGULATORS];
> +};
This is only used in the regulator driver. Do you have a regulator
specific header file that you can define it in instead?
> +struct rk808 {
> + struct i2c_client *i2c;
> + struct regmap_irq_chip_data *irq_data;
> + struct regmap *regmap;
> +};
> +#endif /* __LINUX_REGULATOR_rk808_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
