Document continuous Burst Clock option. With this option Burst Clock, if enabled, will output continuous clock, otherwise Burst Clock will output clock only when necessary. --- Documentation/devicetree/bindings/bus/imx-weim.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 1b1d1c5c21ea..e7f502070d77 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -48,6 +48,11 @@ Optional properties: devices, the presence of this property indicates that the weim bus should operate in Burst Clock Mode. + - fsl,continuous-burst-clk Make Burst Clock to output continuous clock. + Without this option Burst Clock will output clock + only when necessary. This takes effect only if + "fsl,burst-clk-enable" is set. + Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the -- 2.32.0
