On Wed, Nov 24, 2021 at 08:55:42PM +0300, Ivan Bornyakov wrote: > Document continuous Burst Clock option. With this option Burst Clock, if > enabled, will output continuous clock, otherwise Burst Clock will output > clock only when necessary. Missing S-o-b. checkpatch.pl will tell you this. > --- > Documentation/devicetree/bindings/bus/imx-weim.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt > index 1b1d1c5c21ea..e7f502070d77 100644 > --- a/Documentation/devicetree/bindings/bus/imx-weim.txt > +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt > @@ -48,6 +48,11 @@ Optional properties: > devices, the presence of this property indicates that > the weim bus should operate in Burst Clock Mode. > > + - fsl,continuous-burst-clk Make Burst Clock to output continuous clock. > + Without this option Burst Clock will output clock > + only when necessary. This takes effect only if > + "fsl,burst-clk-enable" is set. > + > Timing property for child nodes. It is mandatory, not optional. > > - fsl,weim-cs-timing: The timing array, contains timing values for the > -- > 2.32.0 > > >
