Add helper functions to read/read modify write pin config. Switch to use helper functions for pins supporting PIN_CONFIG_INPUT_ENABLE capabilities. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 78 +++++++++++++++++-------- 1 file changed, 54 insertions(+), 24 deletions(-) diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index 20b2af889ca9..f294ae7b8b5a 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -91,6 +91,8 @@ #define SD_CH(n) (0x3000 + (n) * 4) #define QSPI (0x3008) +#define PORT_PIN_CFG_OFFSET 0x80 + #define PVDD_1800 1 /* I/O domain voltage <= 1.8V */ #define PVDD_3300 0 /* I/O domain voltage >= 3.3V */ @@ -424,6 +426,52 @@ static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev, return ret; } +static u32 rzg2l_read_pin_config(struct rzg2l_pinctrl *pctrl, bool port_pin, + u32 offset, u8 bit, u32 mask) +{ + void __iomem *addr = pctrl->base + offset; + unsigned long flags; + u32 reg; + + if (port_pin) + addr += PORT_PIN_CFG_OFFSET; + + /* handle _L/_H for 32-bit register read/write */ + if (bit >= 4) { + bit -= 4; + addr += 4; + } + + spin_lock_irqsave(&pctrl->lock, flags); + reg = readl(addr) & (mask << (bit * 8)); + spin_unlock_irqrestore(&pctrl->lock, flags); + reg = (reg >> (bit * 8)) & mask; + + return reg; +} + +static void rzg2l_rmw_pin_config(struct rzg2l_pinctrl *pctrl, bool port_pin, + u32 offset, u8 bit, u32 mask, u32 val) +{ + void __iomem *addr = pctrl->base + offset; + unsigned long flags; + u32 reg; + + if (port_pin) + addr += PORT_PIN_CFG_OFFSET; + + /* handle _L/_H for 32-bit register read/write */ + if (bit >= 4) { + bit -= 4; + addr += 4; + } + + spin_lock_irqsave(&pctrl->lock, flags); + reg = readl(addr) & ~(mask << (bit * 8)); + writel(reg | (val << (bit * 8)), addr); + spin_unlock_irqrestore(&pctrl->lock, flags); +} + static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev, unsigned int _pin, unsigned long *config) @@ -432,10 +480,11 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev, enum pin_config_param param = pinconf_to_config_param(*config); const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin]; unsigned int *pin_data = pin->drv_data; + bool port_pin = false; unsigned int arg = 0; unsigned long flags; void __iomem *addr; - u32 port = 0, reg; + u32 port = 0; u32 cfg = 0; u8 bit = 0; @@ -452,17 +501,8 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev, case PIN_CONFIG_INPUT_ENABLE: if (!(cfg & PIN_CFG_IEN)) return -EINVAL; - spin_lock_irqsave(&pctrl->lock, flags); - /* handle _L/_H for 32-bit register read/write */ - addr = pctrl->base + IEN(port); - if (bit >= 4) { - bit -= 4; - addr += 4; - } - reg = readl(addr) & (IEN_MASK << (bit * 8)); - arg = (reg >> (bit * 8)) & 0x1; - spin_unlock_irqrestore(&pctrl->lock, flags); + arg = rzg2l_read_pin_config(pctrl, port_pin, IEN(port), bit, IEN_MASK); break; case PIN_CONFIG_POWER_SOURCE: { @@ -502,10 +542,11 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev, const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin]; unsigned int *pin_data = pin->drv_data; enum pin_config_param param; + bool port_pin = false; unsigned long flags; void __iomem *addr; - u32 port = 0, reg; unsigned int i; + u32 port = 0; u32 cfg = 0; u8 bit = 0; @@ -524,21 +565,10 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev, case PIN_CONFIG_INPUT_ENABLE: { unsigned int arg = pinconf_to_config_argument(_configs[i]); - if (!(cfg & PIN_CFG_IEN)) return -EINVAL; - /* handle _L/_H for 32-bit register read/write */ - addr = pctrl->base + IEN(port); - if (bit >= 4) { - bit -= 4; - addr += 4; - } - - spin_lock_irqsave(&pctrl->lock, flags); - reg = readl(addr) & ~(IEN_MASK << (bit * 8)); - writel(reg | (arg << (bit * 8)), addr); - spin_unlock_irqrestore(&pctrl->lock, flags); + rzg2l_rmw_pin_config(pctrl, port_pin, IEN(port), bit, IEN_MASK, !!arg); break; } -- 2.17.1