Hi All, This patch series add support to get/set drive-strength and output-impedance for RZ/G2L SoC. Along with some macro renames and code cleanup. Cheers, Prabhakar Changes for v2: * Fixed review comments pointed by Geert, split up patch 4 from series [1] Note: This patch series is dependent on first two patches of series [1] [1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/ 20211027134509.5036-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/ Lad Prabhakar (5): dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add output-impedance-ohms property pinctrl: renesas: pinctrl-rzg2l: Add helper functions to read/write pin config pinctrl: renesas: pinctrl-rzg2l: Add support to get/set pin config for GPIO port pins pinctrl: renesas: pinctrl-rzg2l: Rename PIN_CFG_* macros to match HW manual pinctrl: renesas: pinctrl-rzg2l: Add support to get/set drive-strength and output-impedance-ohms .../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 + drivers/pinctrl/renesas/pinctrl-rzg2l.c | 316 ++++++++++++------ 2 files changed, 222 insertions(+), 96 deletions(-) -- 2.17.1
