This adds a driver for lan966x to allow a software reset.
Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
drivers/power/reset/Kconfig | 6 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/lan966x-reset.c | 90 +++++++++++++++++++++++++++++
3 files changed, 97 insertions(+)
create mode 100644 drivers/power/reset/lan966x-reset.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 4b563db3ab3e..755b60c143da 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -158,6 +158,12 @@ config POWER_RESET_PIIX4_POWEROFF
southbridge SOff state is entered in response to a request to
power off the system.
+config POWER_RESET_LAN966X
+ bool "Microchip Lan966x reset driver"
+ select MFD_SYSCON
+ help
+ This driver supports restart for Microchip Lan966x.
+
config POWER_RESET_LTC2952
bool "LTC2952 PowerPath power-off driver"
depends on OF_GPIO
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index f606a2f60539..0fbc817c4eb6 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
+obj-$(CONFIG_POWER_RESET_LAN966X) += lan966x-reset.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_REGULATOR) += regulator-poweroff.o
diff --git a/drivers/power/reset/lan966x-reset.c b/drivers/power/reset/lan966x-reset.c
new file mode 100644
index 000000000000..612705b680fe
--- /dev/null
+++ b/drivers/power/reset/lan966x-reset.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * License: Dual MIT/GPL
+ * Copyright (c) 2020 Microchip Corporation
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+static const char *cpu_syscon = "microchip,lan966x-cpu-syscon";
+static const char *gcb_syscon = "microchip,lan966x-switch-syscon";
+
+struct lan966x_reset_context {
+ struct regmap *gcb_ctrl;
+ struct regmap *cpu_ctrl;
+ struct notifier_block restart_handler;
+};
+
+#define PROTECT_REG 0x88
+#define PROTECT_BIT BIT(5)
+#define SOFT_RESET_REG 0x00
+#define SOFT_RESET_BIT BIT(1)
+
+static int lan966x_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct lan966x_reset_context *ctx = container_of(this, struct lan966x_reset_context,
+ restart_handler);
+
+ /* Make sure the core is not protected from reset */
+ regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, 0);
+
+ pr_emerg("Resetting SoC\n");
+
+ regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int lan966x_reset_probe(struct platform_device *pdev)
+{
+ struct lan966x_reset_context *ctx;
+ struct device *dev = &pdev->dev;
+ int err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->gcb_ctrl = syscon_regmap_lookup_by_compatible(gcb_syscon);
+ if (IS_ERR(ctx->gcb_ctrl)) {
+ dev_err(dev, "No gcb_syscon map: %s\n", gcb_syscon);
+ return PTR_ERR(ctx->gcb_ctrl);
+ }
+
+ ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible(cpu_syscon);
+ if (IS_ERR(ctx->cpu_ctrl)) {
+ dev_err(dev, "No cpu_syscon map: %s\n", cpu_syscon);
+ return PTR_ERR(ctx->cpu_ctrl);
+ }
+
+ ctx->restart_handler.notifier_call = lan966x_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id lan966x_reset_of_match[] = {
+ { .compatible = "microchip,lan966x-chip-reset", },
+ { /*sentinel*/ }
+};
+
+static struct platform_driver lan966x_reset_driver = {
+ .probe = lan966x_reset_probe,
+ .driver = {
+ .name = "lan966x-chip-reset",
+ .of_match_table = lan966x_reset_of_match,
+ },
+};
+builtin_platform_driver(lan966x_reset_driver);
--
2.31.1
