On Mon, Sep 20, 2021 at 11:52:14AM +0200, Horatiu Vultur wrote: > Document the lan966x switch device driver bindings > > Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> > --- > .../net/microchip,lan966x-switch.yaml | 114 ++++++++++++++++++ > 1 file changed, 114 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml > > diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml > new file mode 100644 > index 000000000000..53d72a65c168 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml > @@ -0,0 +1,114 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip Lan966x Ethernet switch controller > + > +maintainers: > + - Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> > + - UNGLinuxDriver@xxxxxxxxxxxxx > + > +description: | > + The Lan966x Enterprise Ethernet switch family provides a rich set of > + Enterprise switching features such as advanced TCAM-based VLAN and > + QoS processing enabling delivery of differentiated services, and > + security through TCAM-based frame processing using versatile content > + aware processor (VCAP). > + > +properties: > + $nodename: > + pattern: "^switch@[0-9a-f]+$" > + > + compatible: > + const: microchip,lan966x-switch > + > + reg: > + items: > + - description: cpu target > + - description: devices target > + - description: general control block target > + > + reg-names: > + items: > + - const: cpu > + - const: devices > + - const: gcb > + > + interrupts: > + minItems: 1 Don't need minItems unless it is less than number of entries for 'items'. > + items: > + - description: register based extraction > + > + interrupt-names: > + minItems: 1 > + items: > + - const: xtr > + > + mac-address: true > + > + ethernet-ports: > + type: object > + patternProperties: > + "^port@[0-9a-f]+$": ethernet-port is preferred on new bindings. > + type: object > + > + properties: > + '#address-cells': > + const: 1 > + '#size-cells': > + const: 0 > + > + reg: > + description: Switch port number > + > + phy-mode: > + description: > + This specifies the interface used by the Ethernet SerDes towards > + the PHY or SFP. > + > + phy-handle: > + description: > + phandle of a Ethernet PHY. > + > + required: > + - reg > + - phy-mode > + - phy-handle > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - interrupt-names > + - ethernet-ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + switch: switch@600000000 { Drop unused labels. > + compatible = "microchip,lan966x-switch"; > + reg = <0 0x401000>, > + <0x10004000 0x7fc000>, > + <0x11010000 0xaf0000>; > + reg-names = "cpu", "devices", "gcb"; > + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "xtr"; > + ethernet-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port0: port@0 { > + reg = <0>; > + phy-handle = <&phy0>; > + phy-mode = "gmii"; > + }; > + }; > + }; > + > +... > +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml : Ummm, no. > -- > 2.31.1 > >
