Re: [PATCH v3 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Rakesh Pillai (2021-09-16 09:55:51)
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> new file mode 100644
> index 0000000..051da43
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> @@ -0,0 +1,267 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,hexagon-v56.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Hexagon v56 Peripheral Image Loader
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> +description:
> +  This document defines the binding for a component that loads and boots firmware
> +  on the Qualcomm Technology Inc. Hexagon v56 core.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,qcs404-cdsp-pil
> +      - qcom,sdm845-adsp-pil
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      The base address and size of the qdsp6ss register
> +
> +  interrupts-extended:
> +    minItems: 5
> +    items:
> +      - description: Watchdog interrupt
> +      - description: Fatal interrupt
> +      - description: Ready interrupt
> +      - description: Handover interrupt
> +      - description: Stop acknowledge interrupt
> +
> +  interrupt-names:
> +    minItems: 5
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +
> +  clocks:
> +    minItems: 7
> +    maxItems: 8
> +    description:
> +      List of phandles and clock specifier pairs for the Hexagon,
> +      per clock-names below.
> +
> +  clock-names:
> +    minItems: 7
> +    maxItems: 8
> +
> +  power-domains:
> +    minItems: 1
> +    items:
> +      - description: CX power domain
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 2
> +    description:
> +      reference to the list of resets for the Hexagon.
> +
> +  reset-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  memory-region:
> +    maxItems: 1
> +    description: Reference to the reserved-memory for the Hexagon core
> +
> +  qcom,halt-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      three offsets within syscon for q6, modem and nc halt registers.
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: States used by the AP to signal the Hexagon core
> +    items:
> +      - description: Stop the modem
> +
> +  qcom,smem-state-names:
> +    $ref: /schemas/types.yaml#/definitions/string-array
> +    description: The names of the state bits used for SMP2P output
> +    items:
> +      - const: stop
> +
> +  glink-edge:
> +    type: object
> +    description:
> +      Qualcomm G-Link subnode which represents communication edge, channels
> +      and devices related to the ADSP.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts-extended
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - qcom,halt-regs
> +  - memory-region
> +  - qcom,smem-states
> +  - qcom,smem-state-names

Is there some way to make sure that 'resets' and 'reset-names' is
present when the compatible that defines them is used and not required
otherwise?

> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sdm845-adsp-pil
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: XO clock
> +            - description: SWAY clock
> +            - description: LPASS AHBS AON clock
> +            - description: LPASS AHBM AON clock
> +            - description: QDSP6SS XO clock
> +            - description: QDSP6SS SLEEP clock
> +            - description: QDSP6SS CORE clock
> +        clock-names:
> +          items:
> +            - const: xo
> +            - const: sway_cbcr
> +            - const: lpass_ahbs_aon_cbcr
> +            - const: lpass_ahbm_aon_cbcr
> +            - const: qdsp6ss_xo
> +            - const: qdsp6ss_sleep
> +            - const: qdsp6ss_core
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,qcs404-cdsp-pil
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: XO clock
> +            - description: SWAY clock
> +            - description: TBU clock
> +            - description: BIMC clock
> +            - description: AHB AON clock
> +            - description: Q6SS SLAVE clock
> +            - description: Q6SS MASTER clock
> +            - description: Q6 AXIM clock
> +        clock-names:
> +          items:
> +            - const: xo
> +            - const: sway
> +            - const: tbu
> +            - const: bimc
> +            - const: ahb_aon
> +            - const: q6ss_slave
> +            - const: q6ss_master
> +            - const: q6_axim
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sc7280-wpss-pil

This should be documented above in the compatible list?

> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: GCC WPSS AHB BDG Master clock
> +            - description: GCC WPSS AHB clock
> +            - description: GCC WPSS RSCP clock
> +        clock-names:
> +          items:
> +            - const: gcc_wpss_ahb_bdg_mst_clk
> +            - const: gcc_wpss_ahb_clk
> +            - const: gcc_wpss_rscp_clk

Is the 'gcc_wpss' prefix important? It would be shorter if it wasn't
there.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sdm845-adsp-pil
> +    then:
> +      properties:
> +        resets:
> +          items:
> +            - description: PDC SYNC
> +            - description: CC LPASS
> +        reset-names:
> +          items:
> +            - const: pdc_sync
> +            - const: cc_lpass
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,qcs404-cdsp-pil
> +    then:
> +      properties:
> +        resets:
> +          items:
> +            - description: CDSP restart
> +        reset-names:
> +          items:
> +            - const: restart
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +    remoteproc@17300000 {
> +        compatible = "qcom,sdm845-adsp-pil";
> +        reg = <0x17300000 0x40c>;
> +
> +        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +        interrupt-names = "wdog", "fatal", "ready",
> +                "handover", "stop-ack";
> +
> +        clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                 <&gcc GCC_LPASS_SWAY_CLK>,
> +                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> +                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> +                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> +                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> +                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> +        clock-names = "xo", "sway_cbcr",
> +                "lpass_ahbs_aon_cbcr",
> +                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> +                "qdsp6ss_sleep", "qdsp6ss_core";
> +
> +        power-domains = <&rpmhpd SDM845_CX>;
> +
> +        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> +                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
> +        reset-names = "pdc_sync", "cc_lpass";
> +
> +        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> +
> +        memory-region = <&pil_adsp_mem>;
> +
> +        qcom,smem-states = <&adsp_smp2p_out 0>;
> +        qcom,smem-state-names = "stop";
> +    };

Should there be two more examples for the other compatible strings here?



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux