Add device tree bindings for QCM2290 pinctrl. Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx> --- .../pinctrl/qcom,qcm2290-pinctrl.yaml | 186 ++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml new file mode 100644 index 000000000000..487f91462bfe --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCM2290 TLMM block + +maintainers: + - Shawn Guo <shawn.guo@xxxxxxxxxx> + +description: + This binding describes the Top Level Mode Multiplexer block found in the + QCM2290 platform. + +properties: + compatible: + const: qcom,qcm2290-tlmm + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + + wakeup-parent: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-qcm2290-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-qcm2290-tlmm-state" + +'$defs': + qcom-qcm2290-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ qup0, gpio, ddr_bist, phase_flag0, qdss_gpio8, atest_tsens, + mpm_pwr, m_voc, phase_flag1, qdss_gpio9, atest_tsens2, + phase_flag2, qdss_gpio10, dac_calib0, atest_usb10, phase_flag3, + qdss_gpio11, dac_calib1, atest_usb11, qup1, CRI_TRNG0, + phase_flag4, dac_calib2, atest_usb12, CRI_TRNG1, phase_flag5, + dac_calib3, atest_usb13, qup2, phase_flag6, dac_calib4, + atest_usb1, qup3, pbs_out, PLL_BIST, qdss_gpio, tsense_pwm, + AGERA_PLL, pbs0, qdss_gpio0, pbs1, qdss_gpio1, qup4, tgu_ch0, + tgu_ch1, qup5, tgu_ch2, phase_flag7, qdss_gpio4, dac_calib5, + tgu_ch3, phase_flag8, qdss_gpio5, dac_calib6, phase_flag9, + qdss_gpio6, dac_calib7, phase_flag10, qdss_gpio7, dac_calib8, + SDC2_TB, CRI_TRNG, pbs2, qdss_gpio2, pwm_0, SDC1_TB, pbs3, + qdss_gpio3, cam_mclk, pbs4, adsp_ext, pbs5, cci_i2c, prng_rosc, + pbs6, phase_flag11, dac_calib9, atest_usb20, pbs7, phase_flag12, + dac_calib10, atest_usb21, CCI_TIMER1, GCC_GP1, pbs8, + phase_flag13, dac_calib11, atest_usb22, cci_async, CCI_TIMER0, + pbs9, phase_flag14, dac_calib12, atest_usb23, pbs10, + phase_flag15, dac_calib13, atest_usb2, vsense_trigger, qdss_cti, + CCI_TIMER2, pwm_1, phase_flag16, dac_calib14, atest_char, + phase_flag17, dac_calib15, atest_char0, GP_PDM0, phase_flag18, + dac_calib16, atest_char1, CCI_TIMER3, GP_PDM1, phase_flag19, + dac_calib17, atest_char2, GP_PDM2, phase_flag20, dac_calib18, + atest_char3, phase_flag21, phase_flag22, char_exec, NAV_GPIO, + phase_flag23, phase_flag24, phase_flag25, pbs14, qdss_gpio14, + vfr_1, pbs15, qdss_gpio15, PA_INDICATOR, pwm_2, gsm1_tx, + SSBI_WTR1, pll_bypassnl, pll_reset, phase_flag26, ddr_pxi0, + gsm0_tx, phase_flag27, GCC_GP2, qdss_gpio12, ddr_pxi1, GCC_GP3, + qdss_gpio13, dbg_out, uim2_data, pwm_3, uim2_clk, uim2_reset, + pwm_4, uim2_present, pwm_5, uim1_data, uim1_clk, uim1_reset, + uim1_present, dac_calib19, mdp_vsync, mdp_vsync_out_0, + mdp_vsync_out_1, dac_calib20, dac_calib21, pwm_6, atest_bbrx1, + pbs11, usb_phy, atest_bbrx0, pwm_7, mss_lte, pbs12, pbs13, + wlan1_adc0, wlan1_adc1, sd_write, JITTER_BIST, + atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, + phase_flag28, dac_calib22, ddr_pxi2, phase_flag29, dac_calib23, + phase_flag30, dac_calib24, ddr_pxi3, pwm_8, phase_flag31, + dac_calib25, pwm_9 ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x500000 0x300000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 127>; + + sdc2_on_state: sdc2-on-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + }; -- 2.17.1
