On 07/31/2014 05:24 PM, Sergei Shtylyov wrote: > Hello. > > On 07/31/2014 02:18 PM, Peter Ujfalusi wrote: > >> The board uses aic3106 for audio. > >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> >> --- >> arch/arm/boot/dts/da850-evm.dts | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) > >> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts >> index 09118c72e83f..b9ef2be0b145 100644 >> --- a/arch/arm/boot/dts/da850-evm.dts >> +++ b/arch/arm/boot/dts/da850-evm.dts >> @@ -51,6 +51,20 @@ >> tps: tps@48 { >> reg = <0x48>; >> }; >> + tlv320aic3106: tlv320aic3106@1b { > > The "reg" property is <0x18>, why the unit-address part of a name is > different? True, I have lifted the codec part from other dts file and overlooked the unit-address. I will resend the series with this fixed. > Also, the ePAPR standard [1] says: > > The name of a node should be somewhat generic, reflecting the function of the > device and not its precise programming model. True. This is why the node for the audio support is named as 'sound'. For the components, like in this case I do not see issue to call the audio codec with it's name. > >> + #sound-dai-cells = <0>; >> + compatible = "ti,tlv320aic3106"; >> + reg = <0x18>; >> + status = "okay"; >> + >> + /* Regulators */ >> + IOVDD-supply = <&vdcdc2_reg>; >> + /* Derived from VBAT: Baseboard 3.3V / 1.8V */ >> + AVDD-supply = <&vbat>; >> + DRVDD-supply = <&vbat>; >> + DVDD-supply = <&vbat>; >> + }; >> + > > [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf BTW: there's a newer version available: https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf > > WBR, Sergei > -- Péter -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html