Re: [PATCH 2/5] arm64, thunder: Add initial dts for Cavium Thunder SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Jul 31, 2014 at 7:34 AM, Robert Richter <rric@xxxxxxxxxx> wrote:
> On 30.07.14 11:37:38, Rob Herring wrote:
>> On Wed, Jul 30, 2014 at 10:46 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
>> > On Wed, Jul 30, 2014 at 04:06:31PM +0100, Robert Richter wrote:
>> >> From: Radha Mohan Chintakuntla <rchintakuntla@xxxxxxxxxx>
>
>> >> +/ {
>> >> +     model = "Cavium ThunderX CN88XX Family";
>> >> +     compatible = "cavium,thunder-88xx";
>> >
>> > Please don't use wildcards in compatible strings. Give this an absolute
>> > name, and override as necessary.
>
> The naming 88xx refers to the processor family and arn't actually
> wildcards. In the future we might need another dts file for 87xx, but
> so far all SoCs of 88xx family should use the same dts files. In this
> sense the naming is very specific.

Yes, but each implementation can have its own errata. You might not
need to distinguish them now, but you could in the future.

However, if the family is really all the same die and different parts
are just marketing, then the name is fine. Or if you can easily probe
the exact part and revision it's probably fine.

>
>
>> >> +     cpus {
>> >> +             #address-cells = <2>;
>> >> +             #size-cells = <0>;
>> >> +
>> >> +             cpu@000 {
>> >> +                     device_type = "cpu";
>> >> +                     compatible = "cavium,thunder", "arm,armv8";
>> >> +                     reg = <0x0 0x000>;
>> >> +                     enable-method = "psci";
>> >> +             };
>> >
>> > Just to check: both the SoC and CPU are called thunder?
>
> The soc is called thunder-88xx, the cpu thunder. E.g. an 87xx soc will
> have the same core in which is thunder.

And the next version of the core would be called something else?
thunder-v2? lightning? As long as they are distinguishable they should
be fine.

Rob

>
>
>> >> +     memory@00000000 {
>> >> +             device_type = "memory";
>> >> +             reg = <0x0 0x00000000 0x0 0x80000000>;
>> >> +     };
>> >> +
>> >> +     gic0: interrupt-controller@801000000000 {
>> >
>> > To make this easier to read, please place a comma between 32-bit
>> > portions of the unit address (e.g. here have 8010,00000000).
>
> Changed this.
>
>>
>> Mark, perhaps a dtc or checkpatch.pl check for this?
>>
>> This should also be under a bus node.
>
> Will do.
>
>>
>> >> +             compatible = "arm,gic-v3";
>> >> +             #interrupt-cells = <3>;
>> >> +             #address-cells = <2>;
>> >> +             #size-cells = <2>;
>> >> +             ranges;
>> >
>> > This has no children, so why have ranges, #address-cells, and
>> > #size-cells?
>
> Right, this is a leftover from a change in a follow on patch that
> introduces a child for its. Will remove #address-cells, #size-cells
> and ranges in this patch and move the change to the later patch.
>
>> >
>> >> +             interrupt-controller;
>> >> +             reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
>> >> +                   <0x8010 0x80000000 0x0 0x200000>; /* GICR */
>> >> +             interrupts = <1 9 0xf04>;
>> >> +     };
>
>> >> +             clocks {
>> >> +                     #address-cells = <2>;
>> >> +                     #size-cells = <2>;
>> >> +                     ranges;
>> >> +
>> >> +                     refclk50mhz: refclk50mhz {
>> >> +                             compatible = "fixed-clock";
>> >> +                             #clock-cells = <0>;
>> >> +                             clock-frequency = <50000000>;
>> >> +                             clock-output-names = "refclk50mhz";
>> >> +                     };
>> >> +             };
>> >
>> > Please get rid of the clocks node and just put the clocks here.
>
> Will do.
>
>> >
>> >> +
>> >> +             uaa0: serial@87e024000000 {
>> >> +                     compatible = "arm,pl011", "arm,primecell";
>> >> +                     reg = <0x87e0 0x24000000 0x0 0x1000>;
>> >> +                     interrupts = <1 21 4>;
>> >> +                     clocks = <&refclk50mhz>;
>> >> +                     clock-names = "apb_pclk";
>> >
>> > Is this actually the apb_pclk, or is the the uartclk? I assume it's the
>> > latter.
>>
>> Shouldn't new bindings have both clocks here? A single clock was a
>> mistake I think (mine in fact).
>
> Do you mean
>                         clock-names = "uartclk", "apb_pclk";
> here?

Yes, but Mark said this change never happened so maybe it is fine. In
any case, follow the pl011 binding documentation.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux