Hi,
On Wed, Jul 30, 2014 at 04:06:31PM +0100, Robert Richter wrote:
> From: Radha Mohan Chintakuntla <rchintakuntla@xxxxxxxxxx>
>
> Add initial device tree nodes for Cavium Thunder SoCs with support of
> 48 cores and gicv3. The dts file requires further changes, esp. for
> pci, gicv3-its and smmu. This changes will be added later together
> with the device drivers.
>
> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@xxxxxxxxxx>
> Signed-off-by: Robert Richter <rrichter@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/thunder-88xx.dts | 387 +++++++++++++++++++++++++++++++++++
> 2 files changed, 388 insertions(+)
> create mode 100644 arch/arm64/boot/dts/thunder-88xx.dts
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index c52bdb051f66..f8001a62029c 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
> dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
> dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
>
> diff --git a/arch/arm64/boot/dts/thunder-88xx.dts b/arch/arm64/boot/dts/thunder-88xx.dts
> new file mode 100644
> index 000000000000..4cf20ac9138b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/thunder-88xx.dts
> @@ -0,0 +1,387 @@
> +/*
> + * Cavium Thunder DTS file
> + *
> + * Copyright (C) 2013, Cavium Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +/dts-v1/;
> +
> +/* Reserving first 12MB of DDR for firmware */
> +/memreserve/ 0x00000000 0x00c00000;
What exactly is this memreserve intended to protect at runtime?
The only item of runtime firmware I see in use below is PSCI on the
secure side.
How is the kernel booted on this platform? UEFI?
> +/ {
> + model = "Cavium ThunderX CN88XX Family";
> + compatible = "cavium,thunder-88xx";
Please don't use wildcards in compatible strings. Give this an absolute
name, and override as necessary.
> + interrupt-parent = <&gic0>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uaa0;
> + serial1 = &uaa1;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
Nice!
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu@000 {
> + device_type = "cpu";
> + compatible = "cavium,thunder", "arm,armv8";
> + reg = <0x0 0x000>;
> + enable-method = "psci";
> + };
Just to check: both the SoC and CPU are called thunder?
[...]
> +
> + memory@00000000 {
> + device_type = "memory";
> + reg = <0x0 0x00000000 0x0 0x80000000>;
> + };
> +
> + gic0: interrupt-controller@801000000000 {
To make this easier to read, please place a comma between 32-bit
portions of the unit address (e.g. here have 8010,00000000).
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
This has no children, so why have ranges, #address-cells, and
#size-cells?
> + interrupt-controller;
> + reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
> + <0x8010 0x80000000 0x0 0x200000>; /* GICR */
> + interrupts = <1 9 0xf04>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xff01>,
> + <1 14 0xff01>,
> + <1 11 0xff01>,
> + <1 10 0xff01>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clocks {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + refclk50mhz: refclk50mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + clock-output-names = "refclk50mhz";
> + };
> + };
Please get rid of the clocks node and just put the clocks here.
> +
> + uaa0: serial@87e024000000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x87e0 0x24000000 0x0 0x1000>;
> + interrupts = <1 21 4>;
> + clocks = <&refclk50mhz>;
> + clock-names = "apb_pclk";
Is this actually the apb_pclk, or is the the uartclk? I assume it's the
latter.
> + };
> +
> + uaa1: serial@87e025000000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x87e0 0x25000000 0x0 0x1000>;
> + interrupts = <1 22 4>;
> + clocks = <&refclk50mhz>;
> + clock-names = "apb_pclk";
Similarly?
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
