Re: [PATCH v10 0/6] Re-introduce TX FIFO resize for larger EP bursting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Dne 18. 08. 21 v 21:07 Ferry Toth napsal(a):
Hi,

Op 18-08-2021 om 00:00 schreef Ferry Toth:
Hi,

Op 16-08-2021 om 07:18 schreef Felipe Balbi:
Hi,

Ferry Toth <fntoth@xxxxxxxxx> writes:
Ferry Toth <fntoth@xxxxxxxxx> writes:
Ferry Toth <fntoth@xxxxxxxxx> writes:
Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542
2015.01.21:18.19.48
RIP: 0010:0x500000000
Code: Unable to access opcode bytes at RIP 0x4ffffffd6.
RSP: 0018:ffffa4d00045fc28 EFLAGS: 00010046
RAX: 0000000500000000 RBX: ffff8cd546aed200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8cd547bfcae0 RDI: ffff8cd546aed200 RBP: ffff8cd547bfcae0 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8cd541fd28c0 R11: 0000000000000000 R12: ffff8cd547342828 R13: ffff8cd546aed248 R14: 0000000000000000 R15: ffff8cd548b1d000 FS:  0000000000000000(0000) GS:ffff8cd57e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000500000000 CR3: 000000000311e000 CR4: 00000000001006f0
Call Trace:
        ? dwc3_remove_requests.constprop.0+0x14d/0x170
        ? __dwc3_gadget_ep_disable+0x7a/0x160
        ? dwc3_gadget_ep_disable+0x3d/0xd0
        ? usb_ep_disable+0x1c/0x
        ? u_audio_stop_capture+0x79/0x120 [u_audio]
        ? afunc_set_alt+0x73/0x80 [usb_f_uac2]
So this is triggered by a SetInterface request...

        ? composite_setup+0x224/0x1b90 [libcomposite]
        ? __dwc3_gadget_kick_transfer+0x160/0x400
        ? dwc3_gadget_ep_queue+0xf3/0x1a0
        ? configfs_composite_setup+0x6b/0x90 [libcomposite]
        ? configfs_composite_setup+0x6b/0x90 [libcomposite]
        ? dwc3_ep0_interrupt+0x459/0xa40
        ? dwc3_thread_interrupt+0x8ee/0xf40
        ? __schedule+0x235/0x6c0
        ? disable_irq_nosync+0x10/0x10
        ? irq_thread_fn+0x1b/0x60
        ? irq_thread+0xc0/0x160
        ? irq_thread_check_affinity+0x70/0x70
        ? irq_forced_thread_fn+0x70/0x70
        ? kthread+0x122/0x140
        ? set_kthread_struct+0x40/0x40
        ? ret_from_fork+0x22/0x30
Do you mind enabling dwc3 traces and collecting them? Trying to figure
out how we got here.

I'll try if I can get the same error by booting with USB in host mode and then switch to device mode. If so I can enable traces and collect as
you explained me before.

I'll try before monday, as then I fly for a holiday and will not be
available before rc5.
you can enable all of those with kernel cmdline :-)

https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html

you need ftrace_dump_on_oops=1 and also need the correct options on
trace_buf_size and trace_event.

On Edison-Arduino I have a switch to go to device mode, after which
udev triggers a script configure gadgets through configfs.

I tried to log following these instructions:

https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs <https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs>

Unfortunately the kernel crashes so badly I can not get to the ` cp /t/trace /root/trace.txt` line (after a while the watchdog kicks).

What to do next?
Pass ftrace_dump_on_oops to kernel cmdline.

No sure if I did this right, on oops everything is pushed to console
(115k2 serial), I hope nothing essential is lost.

I copied the screen buffer to file see attached.
Thank you, I bet it took quite a some time :-) Anyway, looking at
the logs around Set Interface requests, we can track every endpoint
that's disabled. I'll take a guess and assume we're failing at the last Set Interface, that means we should have something odd with ep6in, but
everything looks fine in the trace output:

[   75.823107] irq/14-d-596       0d... 42789194us : dwc3_gadget_ep_enable: ep6in: mps 192/346 streams 16 burst 0 ring 0/0 flags E:swbp:< [   75.835472] irq/14-d-596       0d... 42789198us : dwc3_alloc_request: ep6in: req 0000000002c71409 length 0/0 zsI ==> 0 [   75.846416] irq/14-d-596       0d... 42789202us : dwc3_ep_queue: ep6in: req 0000000002c71409 length 0/192 zsI ==> -115 [   75.857360] irq/14-d-596       0d... 42789204us : dwc3_alloc_request: ep6in: req 00000000a324f5d0 length 0/0 zsI ==> 0 [   75.868301] irq/14-d-596       0d... 42789206us : dwc3_ep_queue: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -115 [   75.879244] irq/14-d-596       0d... 42789209us : dwc3_event: event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase] [   75.891880] irq/14-d-596       0d... 42789211us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c33 (HLcs:SC:status2) [   75.989131] irq/14-d-596       0d... 42789224us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful [   76.096261] irq/14-d-596       0d... 42789272us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase] [   76.107834] irq/14-d-596       0d... 42789275us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c32 (hLcs:SC:status2) [   76.122944] irq/14-d-596       0d... 42789277us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 0/0 zsI ==> 0 [   76.134160] irq/14-d-596       0d... 42789280us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 8 ctrl 00000c23 (HLcs:SC:setup) [   76.231322] irq/14-d-596       0d... 42789292us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful [   76.297418] kworker/-23        0d... 42789670us : dwc3_ep_queue: ep3in: req 0000000029586135 length 0/96 ZsI ==> -115 [   76.308278] kworker/-23        0d... 42789695us : dwc3_prepare_trb: ep3in: trb 00000000b81213d6 (E1:D0) buf 0000000003b7a800 size 96 ctrl 00000811 (Hlcs:sC:normal) [   76.395294] kworker/-23        0d... 42789707us : dwc3_gadget_ep_cmd: ep3in: cmd 'Update Transfer' [60007] params 00000000 00000000 00000000 --> status: Successful [   76.471900] irq/14-d-596       0d... 42789842us : dwc3_event: event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase] [   76.489308] irq/14-d-596       0d... 42789845us : dwc3_ctrl_req: Set Interface(Intf = 5, Alt.Setting = 0) [   76.505650] irq/14-d-596       0d... 42789851us : dwc3_ep_dequeue: ep6in: req 0000000002c71409 length 0/192 zsI ==> -115 [   76.523315] irq/14-d-596       0d... 42789854us : dwc3_gadget_giveback: ep6in: req 0000000002c71409 length 0/192 zsI ==> -104 [   76.541427] irq/14-d-596       0d... 42789857us : dwc3_free_request: ep6in: req 0000000002c71409 length 0/192 zsI ==> -104 [   76.559267] irq/14-d-596       0d... 42789859us : dwc3_ep_dequeue: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -115 [   76.576937] irq/14-d-596       0d... 42789861us : dwc3_gadget_giveback: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -104 [   76.595046] irq/14-d-596       0d... 42789862us : dwc3_free_request: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -104 [   76.612892] irq/14-d-596       0d... 42789865us : dwc3_gadget_ep_disable: ep6in: mps 192/346 streams 16 burst 0 ring 0/0 flags E:swbp:< [   76.665535] irq/14-d-596       0d... 42789873us : dwc3_event: event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase] [   76.684716] irq/14-d-596       0d... 42789875us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c33 (HLcs:SC:status2) [   76.819195] irq/14-d-596       0d... 42789886us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful [   76.926324] irq/14-d-596       0d... 42789930us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase] [   76.937892] irq/14-d-596       0d... 42789933us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c32 (hLcs:SC:status2) [   76.953003] irq/14-d-596       0d... 42789935us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 0/0 zsI ==> 0 [   76.964217] irq/14-d-596       0d... 42789938us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 8 ctrl 00000c23 (HLcs:SC:setup) [   77.061379] irq/14-d-596       0d... 42789950us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful [   77.168595] irq/14-d-596       0d... 42790509us : dwc3_event: event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase] [   77.180159] irq/14-d-596       0d... 42790512us : dwc3_ctrl_req: Get String Descriptor(Index = 18, Length = 255) [   77.190578] irq/14-d-596       0d... 42790537us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 0000000003b68000 size 36 ctrl 00000c53 (HLcs:SC:data) [   77.287648] irq/14-d-596       0d... 42790550us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful [   77.333107] irq/14-d-596       0d... 42790557us : dwc3_event: event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase] [   77.407223] irq/14-d-596       0d... 42790575us : dwc3_event: event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase] [   77.480985] irq/14-d-596       0d... 42790588us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase] [   77.492376] irq/14-d-596       0d... 42790590us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 0000000003b68000 size 0 ctrl 00000c52 (hLcs:SC:data) [   77.507221] irq/14-d-596       0d... 42790595us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 36/36 ZsI ==> 0 [   77.518609] irq/14-d-596       0d... 42790597us : dwc3_event: event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase] [   77.531332] irq/14-d-596       0d... 42790598us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c43 (HLcs:SC:status3) [   77.628669] irq/14-d-596       0d... 42790609us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful

Do you mind adding a few prints in dwc3_remove_requests to tell us which endpoint is being processed? Then we'll know for sure which one caused
the crash.

I wouldn't mind but am leaving on a holiday, won't have time until 6 aug.
not a problem, we'll still be here when you're back :-)
Well, let's go then :-)

To get back in the mood I have retested 5.13.0, 5.14.0-rc1, 5.14.0-rc2
and 5.14.0-rc5.

I find that 5.13.0 works fine, and the issue starts from 5.14.0-rc1.
That's great finding. We have a bisection point. There are a total of
13764 commits between v5.13 and v5.14-rc1

    $ git rev-list  --count v5.13..v5.14-rc1
    13764

git bisect should find the offending commit in at most 14 tries. That's
not too bad.
I correctly guesstimated that the problem got introduced by the usb merge 79160a60

"Merge tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb"

116 commits(7 bisects).

24f779dac8f3efb9629adc0e486914d93dc45517 is the first bad commit

"usb: gadget: f_uac2/u_audio: add feedback endpoint support"

Ruslan's 3 patches are related to each other so I reverted all three 24f779da...e89bb428 and applied the reverts to rc1.

I can confirm this indeed resolves the problem in rc1.

Is late now, tomorrow evening I will apply the reverts to rc6.

With these reverts rc6 works fine as well.

So, where do we go from here?


I know the patches have been tested on dwc2 (by me and others). I do not know if Ruslan or Jerome tested them on dwc3 but probably not. Ruslan has talked about RPi (my case too) and BeagleboneBlack, both with dwc2. Perhaps the dwc2 behaves a bit differently than dwc3?

The patches add a new EP-IN for async feedback. I am sorry I have not followed your long thread (it started as unrelated to uac). Does the problem appear with f_uac1 or f_uac2? Please how have you reached the above problem?

u_audio_stop_capture calls free_ep_fback https://elixir.bootlin.com/linux/v5.14-rc6/source/drivers/usb/gadget/function/u_audio.c#L414 which clears the feedback request prm->req_fback.

Then (reading from your the call trace), usb_ep_disable calls dwc3_gadget_ep_disable which for every request in the EP calls dwc3_remove_requests which gives every found request back to the gadget function, IIUC by calling the complete method of the request https://elixir.bootlin.com/linux/v5.14-rc6/source/drivers/usb/gadget/udc/core.c#L912 . Perhaps the problem is somewhere here?

The dwc2 gadget has its endpoint_disable method a bit different https://elixir.bootlin.com/linux/v5.14-rc6/source/drivers/usb/dwc2/gadget.c#L4200 -> https://elixir.bootlin.com/linux/v5.14-rc6/source/drivers/usb/dwc2/gadget.c#L3251 -> https://elixir.bootlin.com/linux/v5.14-rc6/source/drivers/usb/dwc2/gadget.c#L2090 which also calls usb_gadget_giveback_request https://elixir.bootlin.com/linux/v5.14-rc6/source/drivers/usb/dwc2/gadget.c#L2126 . Perhaps there is some minor but important difference in processing the requests when disabling the endpoint between dwc2 and dwc3?

Thanks,

Pavel.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux