Re: [PATCH v10 0/6] Re-introduce TX FIFO resize for larger EP bursting

[Ferry Toth <fntoth@xxxxxxxxx>]

Hi

Op 25-07-2021 om 08:05 schreef Felipe Balbi:
> Hi,
>
> Ferry Toth <fntoth@xxxxxxxxx> writes:
> > > > > > Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542
> > > > > > 2015.01.21:18.19.48
> > > > > > RIP: 0010:0x500000000
> > > > > > Code: Unable to access opcode bytes at RIP 0x4ffffffd6.
> > > > > > RSP: 0018:ffffa4d00045fc28 EFLAGS: 00010046
> > > > > > RAX: 0000000500000000 RBX: ffff8cd546aed200 RCX: 0000000000000000
> > > > > > RDX: 0000000000000000 RSI: ffff8cd547bfcae0 RDI: ffff8cd546aed200
> > > > > > RBP: ffff8cd547bfcae0 R08: 0000000000000000 R09: 0000000000000001
> > > > > > R10: ffff8cd541fd28c0 R11: 0000000000000000 R12: ffff8cd547342828
> > > > > > R13: ffff8cd546aed248 R14: 0000000000000000 R15: ffff8cd548b1d000
> > > > > > FS:  0000000000000000(0000) GS:ffff8cd57e200000(0000) knlGS:0000000000000000
> > > > > > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > > > CR2: 0000000500000000 CR3: 000000000311e000 CR4: 00000000001006f0
> > > > > > Call Trace:
> > > > > >      ? dwc3_remove_requests.constprop.0+0x14d/0x170
> > > > > >      ? __dwc3_gadget_ep_disable+0x7a/0x160
> > > > > >      ? dwc3_gadget_ep_disable+0x3d/0xd0
> > > > > >      ? usb_ep_disable+0x1c/0x
> > > > > >      ? u_audio_stop_capture+0x79/0x120 [u_audio]
> > > > > >      ? afunc_set_alt+0x73/0x80 [usb_f_uac2]
> > > > > >      ? composite_setup+0x224/0x1b90 [libcomposite]
> > > > > >      ? __dwc3_gadget_kick_transfer+0x160/0x400
> > > > > >      ? dwc3_gadget_ep_queue+0xf3/0x1a0
> > > > > >      ? configfs_composite_setup+0x6b/0x90 [libcomposite]
> > > > > >      ? configfs_composite_setup+0x6b/0x90 [libcomposite]
> > > > > >      ? dwc3_ep0_interrupt+0x459/0xa40
> > > > > >      ? dwc3_thread_interrupt+0x8ee/0xf40
> > > > > >      ? __schedule+0x235/0x6c0
> > > > > >      ? disable_irq_nosync+0x10/0x10
> > > > > >      ? irq_thread_fn+0x1b/0x60
> > > > > >      ? irq_thread+0xc0/0x160
> > > > > >      ? irq_thread_check_affinity+0x70/0x70
> > > > > >      ? irq_forced_thread_fn+0x70/0x70
> > > > > >      ? kthread+0x122/0x140
> > > > > >      ? set_kthread_struct+0x40/0x40
> > > > > >      ? ret_from_fork+0x22/0x30
> > > > > Do you mind enabling dwc3 traces and collecting them? Trying to figure
> > > > > out how we got here.
> > > > I'll try if I can get the same error by booting with USB in host mode
> > > > and then switch to device mode. If so I can enable traces and collect as
> > > > you explained me before.
> > > >
> > > > I'll try before monday, as then I fly for a holiday and will not be
> > > > available before rc5.
> > > you can enable all of those with kernel cmdline :-)
> > >
> > > https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
> > >
> > > you need ftrace_dump_on_oops=1 and also need the correct options on
> > > trace_buf_size and trace_event.
> > On Edison-Arduino I have a switch to go to device mode, after which
> > udev triggers a script configure gadgets through configfs.
> >
> > I tried to log following these instructions:
> >
> > https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs  <https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs>
> >
> > Unfortunately the kernel crashes so badly I can not get to the ` cp
> > /t/trace /root/trace.txt` line (after a while the watchdog kicks).
> >
> > What to do next?
> Pass ftrace_dump_on_oops to kernel cmdline.
No sure if I did this right, on oops everything is pushed to console 
(115k2 serial), I hope nothing essential is lost.

I copied the screen buffer to file see attached.

Attachment: dump-on-oops.7z
Description: application/7z-compressed