Re: [PATCH v10 0/6] Re-introduce TX FIFO resize for larger EP bursting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Ferry Toth <fntoth@xxxxxxxxx> writes:
>> Ferry Toth <fntoth@xxxxxxxxx> writes:
>>>>>> Ferry Toth <fntoth@xxxxxxxxx> writes:
>>>>>>>>>>> Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542
>>>>>>>>>>> 2015.01.21:18.19.48
>>>>>>>>>>> RIP: 0010:0x500000000
>>>>>>>>>>> Code: Unable to access opcode bytes at RIP 0x4ffffffd6.
>>>>>>>>>>> RSP: 0018:ffffa4d00045fc28 EFLAGS: 00010046
>>>>>>>>>>> RAX: 0000000500000000 RBX: ffff8cd546aed200 RCX: 0000000000000000
>>>>>>>>>>> RDX: 0000000000000000 RSI: ffff8cd547bfcae0 RDI: ffff8cd546aed200
>>>>>>>>>>> RBP: ffff8cd547bfcae0 R08: 0000000000000000 R09: 0000000000000001
>>>>>>>>>>> R10: ffff8cd541fd28c0 R11: 0000000000000000 R12: ffff8cd547342828
>>>>>>>>>>> R13: ffff8cd546aed248 R14: 0000000000000000 R15: ffff8cd548b1d000
>>>>>>>>>>> FS:  0000000000000000(0000) GS:ffff8cd57e200000(0000) knlGS:0000000000000000
>>>>>>>>>>> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>>>>>> CR2: 0000000500000000 CR3: 000000000311e000 CR4: 00000000001006f0
>>>>>>>>>>> Call Trace:
>>>>>>>>>>>        ? dwc3_remove_requests.constprop.0+0x14d/0x170
>>>>>>>>>>>        ? __dwc3_gadget_ep_disable+0x7a/0x160
>>>>>>>>>>>        ? dwc3_gadget_ep_disable+0x3d/0xd0
>>>>>>>>>>>        ? usb_ep_disable+0x1c/0x
>>>>>>>>>>>        ? u_audio_stop_capture+0x79/0x120 [u_audio]
>>>>>>>>>>>        ? afunc_set_alt+0x73/0x80 [usb_f_uac2]
>>>> So this is triggered by a SetInterface request...
>>>>
>>>>>>>>>>>        ? composite_setup+0x224/0x1b90 [libcomposite]
>>>>>>>>>>>        ? __dwc3_gadget_kick_transfer+0x160/0x400
>>>>>>>>>>>        ? dwc3_gadget_ep_queue+0xf3/0x1a0
>>>>>>>>>>>        ? configfs_composite_setup+0x6b/0x90 [libcomposite]
>>>>>>>>>>>        ? configfs_composite_setup+0x6b/0x90 [libcomposite]
>>>>>>>>>>>        ? dwc3_ep0_interrupt+0x459/0xa40
>>>>>>>>>>>        ? dwc3_thread_interrupt+0x8ee/0xf40
>>>>>>>>>>>        ? __schedule+0x235/0x6c0
>>>>>>>>>>>        ? disable_irq_nosync+0x10/0x10
>>>>>>>>>>>        ? irq_thread_fn+0x1b/0x60
>>>>>>>>>>>        ? irq_thread+0xc0/0x160
>>>>>>>>>>>        ? irq_thread_check_affinity+0x70/0x70
>>>>>>>>>>>        ? irq_forced_thread_fn+0x70/0x70
>>>>>>>>>>>        ? kthread+0x122/0x140
>>>>>>>>>>>        ? set_kthread_struct+0x40/0x40
>>>>>>>>>>>        ? ret_from_fork+0x22/0x30
>>>>>>>>>> Do you mind enabling dwc3 traces and collecting them? Trying to figure
>>>>>>>>>> out how we got here.
>>>>>>>>>>
>>>>>>>>> I'll try if I can get the same error by booting with USB in host mode
>>>>>>>>> and then switch to device mode. If so I can enable traces and collect as
>>>>>>>>> you explained me before.
>>>>>>>>>
>>>>>>>>> I'll try before monday, as then I fly for a holiday and will not be
>>>>>>>>> available before rc5.
>>>>>>>> you can enable all of those with kernel cmdline :-)
>>>>>>>>
>>>>>>>> https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
>>>>>>>>
>>>>>>>> you need ftrace_dump_on_oops=1 and also need the correct options on
>>>>>>>> trace_buf_size and trace_event.
>>>>>>>>
>>>>>>> On Edison-Arduino I have a switch to go to device mode, after which
>>>>>>> udev triggers a script configure gadgets through configfs.
>>>>>>>
>>>>>>> I tried to log following these instructions:
>>>>>>>
>>>>>>> https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs  <https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs>
>>>>>>>
>>>>>>> Unfortunately the kernel crashes so badly I can not get to the ` cp
>>>>>>> /t/trace /root/trace.txt` line (after a while the watchdog kicks).
>>>>>>>
>>>>>>> What to do next?
>>>>>> Pass ftrace_dump_on_oops to kernel cmdline.
>>>>>>
>>>>> No sure if I did this right, on oops everything is pushed to console
>>>>> (115k2 serial), I hope nothing essential is lost.
>>>>>
>>>>> I copied the screen buffer to file see attached.
>>>> Thank you, I bet it took quite a some time :-) Anyway, looking at
>>>> the logs around Set Interface requests, we can track every endpoint
>>>> that's disabled. I'll take a guess and assume we're failing at the last
>>>> Set Interface, that means we should have something odd with ep6in, but
>>>> everything looks fine in the trace output:
>>>>
>>>> [   75.823107] irq/14-d-596       0d... 42789194us : dwc3_gadget_ep_enable: ep6in: mps 192/346 streams 16 burst 0 ring 0/0 flags E:swbp:<
>>>> [   75.835472] irq/14-d-596       0d... 42789198us : dwc3_alloc_request: ep6in: req 0000000002c71409 length 0/0 zsI ==> 0
>>>> [   75.846416] irq/14-d-596       0d... 42789202us : dwc3_ep_queue: ep6in: req 0000000002c71409 length 0/192 zsI ==> -115
>>>> [   75.857360] irq/14-d-596       0d... 42789204us : dwc3_alloc_request: ep6in: req 00000000a324f5d0 length 0/0 zsI ==> 0
>>>> [   75.868301] irq/14-d-596       0d... 42789206us : dwc3_ep_queue: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -115
>>>> [   75.879244] irq/14-d-596       0d... 42789209us : dwc3_event: event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
>>>> [   75.891880] irq/14-d-596       0d... 42789211us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c33 (HLcs:SC:status2)
>>>> [   75.989131] irq/14-d-596       0d... 42789224us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>> [   76.096261] irq/14-d-596       0d... 42789272us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
>>>> [   76.107834] irq/14-d-596       0d... 42789275us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c32 (hLcs:SC:status2)
>>>> [   76.122944] irq/14-d-596       0d... 42789277us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 0/0 zsI ==> 0
>>>> [   76.134160] irq/14-d-596       0d... 42789280us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 8 ctrl 00000c23 (HLcs:SC:setup)
>>>> [   76.231322] irq/14-d-596       0d... 42789292us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>> [   76.297418] kworker/-23        0d... 42789670us : dwc3_ep_queue: ep3in: req 0000000029586135 length 0/96 ZsI ==> -115
>>>> [   76.308278] kworker/-23        0d... 42789695us : dwc3_prepare_trb: ep3in: trb 00000000b81213d6 (E1:D0) buf 0000000003b7a800 size 96 ctrl 00000811 (Hlcs:sC:normal)
>>>> [   76.395294] kworker/-23        0d... 42789707us : dwc3_gadget_ep_cmd: ep3in: cmd 'Update Transfer' [60007] params 00000000 00000000 00000000 --> status: Successful
>>>> [   76.471900] irq/14-d-596       0d... 42789842us : dwc3_event: event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
>>>> [   76.489308] irq/14-d-596       0d... 42789845us : dwc3_ctrl_req: Set Interface(Intf = 5, Alt.Setting = 0)
>>>> [   76.505650] irq/14-d-596       0d... 42789851us : dwc3_ep_dequeue: ep6in: req 0000000002c71409 length 0/192 zsI ==> -115
>>>> [   76.523315] irq/14-d-596       0d... 42789854us : dwc3_gadget_giveback: ep6in: req 0000000002c71409 length 0/192 zsI ==> -104
>>>> [   76.541427] irq/14-d-596       0d... 42789857us : dwc3_free_request: ep6in: req 0000000002c71409 length 0/192 zsI ==> -104
>>>> [   76.559267] irq/14-d-596       0d... 42789859us : dwc3_ep_dequeue: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -115
>>>> [   76.576937] irq/14-d-596       0d... 42789861us : dwc3_gadget_giveback: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -104
>>>> [   76.595046] irq/14-d-596       0d... 42789862us : dwc3_free_request: ep6in: req 00000000a324f5d0 length 0/192 zsI ==> -104
>>>> [   76.612892] irq/14-d-596       0d... 42789865us : dwc3_gadget_ep_disable: ep6in: mps 192/346 streams 16 burst 0 ring 0/0 flags E:swbp:<
>>>> [   76.665535] irq/14-d-596       0d... 42789873us : dwc3_event: event (000020c2): ep0in: Transfer Not Ready [0] (Not Active) [Status Phase]
>>>> [   76.684716] irq/14-d-596       0d... 42789875us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c33 (HLcs:SC:status2)
>>>> [   76.819195] irq/14-d-596       0d... 42789886us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>> [   76.926324] irq/14-d-596       0d... 42789930us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Status Phase]
>>>> [   76.937892] irq/14-d-596       0d... 42789933us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c32 (hLcs:SC:status2)
>>>> [   76.953003] irq/14-d-596       0d... 42789935us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 0/0 zsI ==> 0
>>>> [   76.964217] irq/14-d-596       0d... 42789938us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 8 ctrl 00000c23 (HLcs:SC:setup)
>>>> [   77.061379] irq/14-d-596       0d... 42789950us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>> [   77.168595] irq/14-d-596       0d... 42790509us : dwc3_event: event (0000c040): ep0out: Transfer Complete (sIL) [Setup Phase]
>>>> [   77.180159] irq/14-d-596       0d... 42790512us : dwc3_ctrl_req: Get String Descriptor(Index = 18, Length = 255)
>>>> [   77.190578] irq/14-d-596       0d... 42790537us : dwc3_prepare_trb: ep0in: trb 000000004c0ae319 (E0:D0) buf 0000000003b68000 size 36 ctrl 00000c53 (HLcs:SC:data)
>>>> [   77.287648] irq/14-d-596       0d... 42790550us : dwc3_gadget_ep_cmd: ep0in: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>> [   77.333107] irq/14-d-596       0d... 42790557us : dwc3_event: event (000010c2): ep0in: Transfer Not Ready [0] (Not Active) [Data Phase]
>>>> [   77.407223] irq/14-d-596       0d... 42790575us : dwc3_event: event (000090c2): ep0in: Transfer Not Ready [0] (Active) [Data Phase]
>>>> [   77.480985] irq/14-d-596       0d... 42790588us : dwc3_event: event (0000c042): ep0in: Transfer Complete (sIL) [Data Phase]
>>>> [   77.492376] irq/14-d-596       0d... 42790590us : dwc3_complete_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 0000000003b68000 size 0 ctrl 00000c52 (hLcs:SC:data)
>>>> [   77.507221] irq/14-d-596       0d... 42790595us : dwc3_gadget_giveback: ep0out: req 00000000cb1bd3cd length 36/36 ZsI ==> 0
>>>> [   77.518609] irq/14-d-596       0d... 42790597us : dwc3_event: event (000020c0): ep0out: Transfer Not Ready [0] (Not Active) [Status Phase]
>>>> [   77.531332] irq/14-d-596       0d... 42790598us : dwc3_prepare_trb: ep0out: trb 000000004c0ae319 (E0:D0) buf 000000001bded000 size 0 ctrl 00000c43 (HLcs:SC:status3)
>>>> [   77.628669] irq/14-d-596       0d... 42790609us : dwc3_gadget_ep_cmd: ep0out: cmd 'Start Transfer' [406] params 00000000 1bded000 00000000 --> status: Successful
>>>>
>>>> Do you mind adding a few prints in dwc3_remove_requests to tell us which
>>>> endpoint is being processed? Then we'll know for sure which one caused
>>>> the crash.
>>>>
>>> I wouldn't mind but am leaving on a holiday, won't have time until 6 aug.
>> not a problem, we'll still be here when you're back :-)
>
> Well, let's go then :-)
>
> To get back in the mood I have retested 5.13.0, 5.14.0-rc1, 5.14.0-rc2
> and 5.14.0-rc5.
>
> I find that 5.13.0 works fine, and the issue starts from 5.14.0-rc1.

That's great finding. We have a bisection point. There are a total of
13764 commits between v5.13 and v5.14-rc1

	$ git rev-list  --count v5.13..v5.14-rc1
	13764

git bisect should find the offending commit in at most 14 tries. That's
not too bad.

> With 5.14.0-rc5 the problem seems worse (or different?), and just
> disabling uac2 gadget does not prevent the crash. Even disabling gser 
> and mass_storage.usb0 as well there is still a crash.
>
> Now I'm not sure how to proceed. Bisect rc1? Or focus on rc5 (rc6?)?

I'd first bisect between 5.13 and v5.14-rc1. Once you find the offending
commit, verify if reverting that on -rc1 works, then verify if reverting
on -rc5 also works :-)

-- 
balbi



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux