Hi, This series adds support for Exegin Q5xR5 and CalAmp LMU5000 boards which were maintained up to this moment, separatelly, in OpenWrt tree. With these patches the support for these boards will be included in upstream kernel and there will be no need to forward port the proper patches in OpenWrt every time the OpenWrt kernel version is changed. Thank you, Claudiu Beznea Changes in v2: - swapped commit message and diff b/w patches "dt-bindings: ARM: at91: document exegin q5xr5 board" and "dt-bindings: ARM: at91: document CalAmp LMU5000 board" - re-ordered patches to accommodate the above swapping - collected tags Adam Porter (1): ARM: dts: at91: add CalAmp LMU5000 board Claudiu Beznea (5): ARM: dts: at91: at91sam9260: add pinctrl label dt-bindings: add vendor prefix for calamp dt-bindings: ARM: at91: document CalAmp LMU5000 board dt-bindings: add vendor prefix for exegin dt-bindings: ARM: at91: document exegin q5xr5 board Owen Kirby (1): ARM: dts: at91: add Exegin Q5xR5 board .../devicetree/bindings/arm/atmel-at91.yaml | 12 ++ .../devicetree/bindings/vendor-prefixes.yaml | 4 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/at91-lmu5000.dts | 148 +++++++++++++ arch/arm/boot/dts/at91-q5xr5.dts | 200 ++++++++++++++++++ arch/arm/boot/dts/at91sam9260.dtsi | 2 +- 6 files changed, 367 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/at91-lmu5000.dts create mode 100644 arch/arm/boot/dts/at91-q5xr5.dts -- 2.25.1
