Re: [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 10, 2021 at 09:38:36AM +0530, Prasad Malisetty wrote:
> On the SC7280, By default the clock source for pcie_1_pipe is
> TCXO for gdsc enable. But after the PHY is initialized, the clock
> source must be switched to gcc_pcie_1_pipe_clk from TCXO.
> 
> Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 8a7a300..39e3b21 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -166,6 +166,8 @@ struct qcom_pcie_resources_2_7_0 {
>  	struct regulator_bulk_data supplies[2];
>  	struct reset_control *pci_reset;
>  	struct clk *pipe_clk;
> +	struct clk *gcc_pcie_1_pipe_clk_src;
> +	struct clk *phy_pipe_clk;
>  };
>  
>  union qcom_pcie_resources {
> @@ -1167,6 +1169,16 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
>  	if (ret < 0)
>  		return ret;
>  
> +	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280")) {
> +		res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux");
> +		if (IS_ERR(res->gcc_pcie_1_pipe_clk_src))
> +			return PTR_ERR(res->gcc_pcie_1_pipe_clk_src);
> +
> +		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
> +		if (IS_ERR(res->phy_pipe_clk))
> +			return PTR_ERR(res->phy_pipe_clk);
> +	}
> +
>  	res->pipe_clk = devm_clk_get(dev, "pipe");
>  	return PTR_ERR_OR_ZERO(res->pipe_clk);
>  }
> @@ -1255,6 +1267,12 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
>  static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
>  {
>  	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> +	struct dw_pcie *pci = pcie->pci;
> +	struct device *dev = pci->dev;
> +	struct device_node *node = dev->of_node;
> +
> +	if (of_property_read_bool(node, "pipe-clk-source-switch"))

Wondering why you didn't use the compatible here as well. This will break if the
property exist but the clocks are not.

Thanks,
Mani

> +		clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk);
>  
>  	return clk_prepare_enable(res->pipe_clk);
>  }
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux