This patch adds DT binding document for zynqmp modepin GPIO controller. Modepin GPIO controller has four GPIO pins which can be configurable as input or output. Modepin driver is a bridge between the peripheral driver and GPIO pins. It has set and get APIs for accessing GPIO pins, based on the device-tree entry of reset-gpio property in the peripheral driver, every pin can be configured as input/output and trigger GPIO pin. For more information please refer zynqMp TRM link: Link: https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf Chapter 2: Signals, Interfaces, and Pins Table 2-2: Clock, Reset, and Configuration Pins - PS_MODE Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxxxxx> --- Changes in v2: - Addressed review comments: Update commit message https://lore.kernel.org/linux-arm-kernel/20210615080553.2021061-2-piyush.mehta@xxxxxxxxxx/T/#mbd1fbda813e33b19397b350bde75747c92a0d7e1 https://lore.kernel.org/linux-arm-kernel/20210615080553.2021061-2-piyush.mehta@xxxxxxxxxx/T/#me82b1444ab3776162cdb0077dfc9256365c7e736 --- .../bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml new file mode 100644 index 0000000..39d78f8 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: ZynqMP Mode Pin GPIO controller + +description: + PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin + GPIO controller with configurable from numbers of pins (from 0 to 3 per + PS_MODE). Every pin can be configured as input/output. + +maintainers: + - Piyush Mehta <piyush.mehta@xxxxxxxxxx> + +properties: + compatible: + const: xlnx,zynqmp-gpio-modepin + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + modepin_gpio: gpio { + compatible = "xlnx,zynqmp-gpio-modepin"; + gpio-controller; + #gpio-cells = <2>; + }; + +... -- 2.7.4
