It converts qcom,pon DT bindings from legacy bare text to YAML format.
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
.../bindings/power/reset/qcom,pon.txt | 49 -------------------
.../bindings/power/reset/qcom,pon.yaml | 49 +++++++++++++++++++
2 files changed, 49 insertions(+), 49 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a1e693..000000000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
- "qcom,pm8916-pon"
- "qcom,pms405-pon"
- "qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
- pon@800 {
- compatible = "qcom,pm8916-pon";
-
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 000000000000..7764c804af1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+ - Vinod Koul <vkoul@xxxxxxxxxx>
+
+description: |
+ The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+ and resin along with the Android reboot-mode.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8916-pon
+ - qcom,pms405-pon
+ - qcom,pm8998-pon
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "^mode-.+":
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Vendor-specific mode value written to the mode register
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+ };
+ };
--
2.17.1
