On Mon, Jul 05, 2021 at 10:50:30AM +0800, Shawn Guo wrote:
> It converts qcom,pon DT bindings from legacy bare text to YAML format.
>
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
> .../bindings/power/reset/qcom,pon.txt | 49 -------------------
> .../bindings/power/reset/qcom,pon.yaml | 49 +++++++++++++++++++
> 2 files changed, 49 insertions(+), 49 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> deleted file mode 100644
> index 0c0dc3a1e693..000000000000
> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -Qualcomm PON Device
> -
> -The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
> -and resin along with the Android reboot-mode.
> -
> -This DT node has pwrkey and resin as sub nodes.
> -
> -Required Properties:
> --compatible: Must be one of:
> - "qcom,pm8916-pon"
> - "qcom,pms405-pon"
> - "qcom,pm8998-pon"
> -
> --reg: Specifies the physical address of the pon register
> -
> -Optional subnode:
> --pwrkey: Specifies the subnode pwrkey and should follow the
> - qcom,pm8941-pwrkey.txt description.
> --resin: Specifies the subnode resin and should follow the
> - qcom,pm8xxx-pwrkey.txt description.
> -
> -The rest of the properties should follow the generic reboot-mode description
> -found in reboot-mode.txt
> -
> -Example:
> -
> - pon@800 {
> - compatible = "qcom,pm8916-pon";
> -
> - reg = <0x800>;
> - mode-bootloader = <0x2>;
> - mode-recovery = <0x1>;
> -
> - pwrkey {
> - compatible = "qcom,pm8941-pwrkey";
> - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> - debounce = <15625>;
> - bias-pull-up;
> - linux,code = <KEY_POWER>;
> - };
> -
> - resin {
> - compatible = "qcom,pm8941-resin";
> - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> - debounce = <15625>;
> - bias-pull-up;
> - linux,code = <KEY_VOLUMEDOWN>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
> new file mode 100644
> index 000000000000..7764c804af1d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PON Device
> +
> +maintainers:
> + - Vinod Koul <vkoul@xxxxxxxxxx>
> +
> +description: |
> + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
> + and resin along with the Android reboot-mode.
allOf:
- $ref: /schemas/power/reset/reboot-mode.yaml#
And then...
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,pm8916-pon
> + - qcom,pms405-pon
> + - qcom,pm8998-pon
> +
> + reg:
> + maxItems: 1
> +
> +patternProperties:
> + "^mode-.+":
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Vendor-specific mode value written to the mode register
Drop this.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
unevaluatedProperties: false
> +
> +examples:
> + - |
> + pmic {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pon@800 {
> + compatible = "qcom,pm8916-pon";
> + reg = <0x800>;
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
> + };
> + };
> --
> 2.17.1
>
>
