2014-07-10 5:37 GMT-07:00 Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>:
> Hi Matthew,
>
>
> On 01/17/2014 11:57 PM, Matthew Garrett wrote:
>>
>> Some hardware may be broken in interesting and board-specific ways, such
>> that various bits of functionality don't work. This patch provides a
>> mechanism for overriding mii registers during init based on the contents
>> of
>> the device tree data, allowing board-specific fixups without having to
>> pollute generic code.
>
>
> [six months later]
> I assume nothing ever came out of this patch... is that right?
I have not seen any update, and if it does get implemented at some
point, we'll want separate Device Tree properties which control
invididual or logical groups of bits within a standard MII registers,
not a placeholder for register addresses = value pairs.
>
> Thank you,
> Gerlando
>
>
>>
>> Signed-off-by: Matthew Garrett <matthew.garrett@xxxxxxxxxx>
>> ---
>>
>> V3: Break the main function out into some helper functions and store the
>> values in some structs.
>>
>> Documentation/devicetree/bindings/net/phy.txt | 21 +++++++
>> drivers/net/phy/phy_device.c | 29 ++++++++-
>> drivers/of/of_net.c | 87
>> +++++++++++++++++++++++++++
>> include/linux/of_net.h | 12 ++++
>> 4 files changed, 148 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/phy.txt
>> b/Documentation/devicetree/bindings/net/phy.txt
>> index 7cd18fb..fc50f02 100644
>> --- a/Documentation/devicetree/bindings/net/phy.txt
>> +++ b/Documentation/devicetree/bindings/net/phy.txt
>> @@ -23,6 +23,21 @@ Optional Properties:
>> assume clause 22. The compatible list may also contain other
>> elements.
>>
>> +The following properties may be added to either the phy node or the
>> parent
>> +ethernet device. If not present, the hardware defaults will be used.
>> +
>> +- phy-mii-advertise-10half: 1 to advertise half-duplex 10MBit, 0 to
>> disable
>> +- phy-mii-advertise-10full: 1 to advertise full-duplex 10MBit, 0 to
>> disable
>> +- phy-mii-advertise-100half: 1 to advertise half-duplex 100MBit, 0 to
>> disable
>> +- phy-mii-advertise-100full: 1 to advertise full-duplex 100MBit, 0 to
>> disable
>> +- phy-mii-advertise-100base4: 1 to advertise 100base4, 0 to disable
>> +- phy-mii-advertise-1000half: 1 to advertise half-duplex 1000MBit, 0 to
>> disable
>> +- phy-mii-advertise-1000full: 1 to advertise full-duplex 1000MBit, 0 to
>> disable
>> +- phy-mii-manual-master: 1 to enable manual master/slave configuration, 0
>> + to disable manual master/slave configuration
>> +- phy-mii-as-master: 1 to configure phy to act as master, 0 to configure
>> phy
>> + to act as slave. Ignored if manual master/slave configuration is not
>> enabled.
>> +
>> Example:
>>
>> ethernet-phy@0 {
>> @@ -32,4 +47,10 @@ ethernet-phy@0 {
>> interrupts = <35 1>;
>> reg = <0>;
>> device_type = "ethernet-phy";
>> + // Disable advertising of full duplex 1000MBit
>> + phy-mii-advertise-1000full = <0>;
>> + // Force manual phy master/slave configuration
>> + phy-mii-manual-master = <1>;
>> + // Forcibly configure phy as slave
>> + phy-mii-as-master = <0>;
>> };
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index d6447b3..91793bc 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -33,6 +33,7 @@
>> #include <linux/mii.h>
>> #include <linux/ethtool.h>
>> #include <linux/phy.h>
>> +#include <linux/of_net.h>
>>
>> #include <asm/io.h>
>> #include <asm/irq.h>
>> @@ -497,6 +498,28 @@ void phy_disconnect(struct phy_device *phydev)
>> }
>> EXPORT_SYMBOL(phy_disconnect);
>>
>> +int phy_override_from_of(struct phy_device *phydev)
>> +{
>> + int reg, regval;
>> + u16 val, mask;
>> +
>> + /* Check for phy register overrides from OF */
>> + for (reg = 0; reg < 16; reg++) {
>> + if (!of_get_mii_register(phydev, reg, &val, &mask)) {
>> + if (!mask)
>> + continue;
>> + regval = phy_read(phydev, reg);
>> + if (regval < 0)
>> + continue;
>> + regval &= ~mask;
>> + regval |= val;
>> + phy_write(phydev, reg, regval);
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> int phy_init_hw(struct phy_device *phydev)
>> {
>> int ret;
>> @@ -508,7 +531,11 @@ int phy_init_hw(struct phy_device *phydev)
>> if (ret < 0)
>> return ret;
>>
>> - return phydev->drv->config_init(phydev);
>> + ret = phydev->drv->config_init(phydev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return phy_override_from_of(phydev);
>> }
>>
>> /**
>> diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
>> index 8f9be2e..75751b7 100644
>> --- a/drivers/of/of_net.c
>> +++ b/drivers/of/of_net.c
>> @@ -93,3 +93,90 @@ const void *of_get_mac_address(struct device_node *np)
>> return NULL;
>> }
>> EXPORT_SYMBOL(of_get_mac_address);
>> +
>> +struct mii_override {
>> + char *prop;
>> + u32 supported;
>> + u16 value;
>> +};
>> +
>> +static struct mii_override mii_advertise_override[] = {
>> + { "phy-mii-advertise-10half", SUPPORTED_10baseT_Half,
>> + ADVERTISE_10HALF },
>> + { "phy-mii-advertise-10full", SUPPORTED_10baseT_Full,
>> + ADVERTISE_10FULL },
>> + { "phy-mii-advertise-100half", SUPPORTED_100baseT_Half,
>> + ADVERTISE_100HALF },
>> + { "phy-mii-advertise-100full", SUPPORTED_100baseT_Full,
>> + ADVERTISE_100FULL },
>> + { "phy-mii-advertise-100base4", 0, ADVERTISE_100BASE4 },
>> + { NULL },
>> +};
>> +
>> +static struct mii_override mii_gigabit_override[] = {
>> + { "phy-mii-advertise-1000half", SUPPORTED_1000baseT_Half,
>> + ADVERTISE_1000HALF },
>> + { "phy-mii-advertise-1000full", SUPPORTED_1000baseT_Full,
>> + ADVERTISE_1000FULL },
>> + { "phy-mii-as-master", 0, CTL1000_AS_MASTER },
>> + { "phy-mii-manual-master", 0, CTL1000_ENABLE_MASTER },
>> + { NULL },
>> +};
>> +
>> +static void mii_handle_override(struct mii_override *override_list,
>> + struct phy_device *phydev, u16 *val, u16
>> *mask)
>> +{
>> + struct device *dev = &phydev->dev;
>> + struct device_node *np = dev->of_node;
>> + struct mii_override *override;
>> + u32 tmp;
>> +
>> + if (!np && dev->parent->of_node)
>> + np = dev->parent->of_node;
>> +
>> + if (!np)
>> + return;
>> +
>> + for (override = &override_list[0]; override->prop != NULL;
>> override++) {
>> + if (!of_property_read_u32(np, override->prop, &tmp)) {
>> + if (tmp) {
>> + *val |= override->value;
>> + phydev->advertising |=
>> override->supported;
>> + } else {
>> + phydev->advertising &=
>> ~(override->supported);
>> + }
>> +
>> + *mask |= override->value;
>> + }
>> + }
>> +
>> + return;
>> +}
>> +
>> +/**
>> + * Provide phy register overrides from the device tree. Some hardware may
>> + * be broken in interesting and board-specific ways, so we want a
>> mechanism
>> + * for the board data to provide overrides for default values. This
>> should be
>> + * called during phy init.
>> + */
>> +int of_get_mii_register(struct phy_device *phydev, int reg, u16 *val,
>> + u16 *mask)
>> +{
>> + *val = 0;
>> + *mask = 0;
>> +
>> + switch (reg) {
>> + case MII_ADVERTISE:
>> + mii_handle_override(mii_advertise_override, phydev, val,
>> mask);
>> + break;
>> +
>> + case MII_CTRL1000:
>> + mii_handle_override(mii_gigabit_override, phydev, val,
>> mask);
>> + break;
>> +
>> + default:
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(of_get_mii_register);
>> diff --git a/include/linux/of_net.h b/include/linux/of_net.h
>> index 34597c8..2e478bc 100644
>> --- a/include/linux/of_net.h
>> +++ b/include/linux/of_net.h
>> @@ -7,10 +7,14 @@
>> #ifndef __LINUX_OF_NET_H
>> #define __LINUX_OF_NET_H
>>
>> +#include <linux/phy.h>
>> +
>> #ifdef CONFIG_OF_NET
>> #include <linux/of.h>
>> extern int of_get_phy_mode(struct device_node *np);
>> extern const void *of_get_mac_address(struct device_node *np);
>> +extern int of_get_mii_register(struct phy_device *np, int reg, u16 *val,
>> + u16 *mask);
>> #else
>> static inline int of_get_phy_mode(struct device_node *np)
>> {
>> @@ -21,6 +25,14 @@ static inline const void *of_get_mac_address(struct
>> device_node *np)
>> {
>> return NULL;
>> }
>> +static inline int of_get_mii_register(struct phy_device *np, int reg, u16
>> *val,
>> + u16 *mask)
>> +{
>> + *val = 0;
>> + *mask = 0;
>> +
>> + return -EINVAL;
>> +}
>> #endif
>>
>> #endif /* __LINUX_OF_NET_H */
>>
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
