On Mon, Jul 21, 2014 at 2:17 PM, Marek Belisko <marek@xxxxxxxxxxxxx> wrote: > Update comment about gpio-cells which says not correctly to be set to 0. > When we want to reference tca6507 gpio #gpio-cells must be set to 2 (it is > already correct in example). > Good fix. I applied it Thanks, -Bryan > Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/leds/tca6507.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt > index d7221b8..bad9102 100644 > --- a/Documentation/devicetree/bindings/leds/tca6507.txt > +++ b/Documentation/devicetree/bindings/leds/tca6507.txt > @@ -8,7 +8,7 @@ Required properties: > > Optional properties: > - gpio-controller: allows lines to be used as output-only GPIOs. > -- #gpio-cells: if present, must be 0. > +- #gpio-cells: if present, must not be 0. > > Each led is represented as a sub-node of the ti,tca6507 device. > > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html