Hi Stephen, gentle reminder about this serie. Patrick and Rob have given their Reviewed-by already. Could you have a look at it ? Thanks. Alain On Fri, Apr 30, 2021 at 06:48:30PM +0200, Alain Volmat wrote: > Hi, > > Gentle reminder about this serie concerning STi platform clock drivers. > Could you have a look at them ? > > Thanks. > Alain > > On Wed, Mar 31, 2021 at 10:16:25PM +0200, Alain Volmat wrote: > > Most of ST clock drivers used by STi platform are updated in > > order to introduce clock outputs informations within each drivers > > and thus allow to avoid having to rely on clock-output-names properties > > within DT clock nodes. > > For that purpose, drivers are updated to allow handling both modes > > (with or without clock-output-names). > > Once all DT will have been updated, the legacy mode could be removed > > from the drivers. > > This will also allow, once all STi DT will be corrected, to remove the > > of_clk_detect_critical API from clk core code since STi clock drivers > > are the only drivers using this API. > > > > Alain Volmat (7): > > clk: st: clkgen-pll: remove unused variable of struct clkgen_pll > > clk: st: flexgen: embed soc clock outputs within compatible data > > dt-bindings: clock: st: flexgen: add new introduced compatible > > clk: st: clkgen-pll: embed soc clock outputs within compatible data > > dt-bindings: clock: st: clkgen-pll: add new introduced compatible > > clk: st: clkgen-fsyn: embed soc clock outputs within compatible data > > dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible > > > > .../bindings/clock/st/st,clkgen-pll.txt | 3 + > > .../bindings/clock/st/st,flexgen.txt | 10 + > > .../bindings/clock/st/st,quadfs.txt | 3 + > > drivers/clk/st/clk-flexgen.c | 367 +++++++++++++++++- > > drivers/clk/st/clkgen-fsyn.c | 113 +++++- > > drivers/clk/st/clkgen-pll.c | 121 +++++- > > 6 files changed, 576 insertions(+), 41 deletions(-) > > > > --- > > v4: - add an additional CLK_IS_CRITICAL within flexgen driver > > v3: - removal some useless CLK_IS_CRITICAL and add some comments > > - only keep clk drivers/binding patches within the serie > > > > -- > > 2.17.1 > > >