Quoting Alain Volmat (2021-03-31 13:16:25) > Most of ST clock drivers used by STi platform are updated in > order to introduce clock outputs informations within each drivers > and thus allow to avoid having to rely on clock-output-names properties > within DT clock nodes. > For that purpose, drivers are updated to allow handling both modes > (with or without clock-output-names). > Once all DT will have been updated, the legacy mode could be removed > from the drivers. > This will also allow, once all STi DT will be corrected, to remove the > of_clk_detect_critical API from clk core code since STi clock drivers > are the only drivers using this API. > > Alain Volmat (7): > clk: st: clkgen-pll: remove unused variable of struct clkgen_pll > clk: st: flexgen: embed soc clock outputs within compatible data > dt-bindings: clock: st: flexgen: add new introduced compatible > clk: st: clkgen-pll: embed soc clock outputs within compatible data > dt-bindings: clock: st: clkgen-pll: add new introduced compatible > clk: st: clkgen-fsyn: embed soc clock outputs within compatible data > dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible > > .../bindings/clock/st/st,clkgen-pll.txt | 3 + > .../bindings/clock/st/st,flexgen.txt | 10 + > .../bindings/clock/st/st,quadfs.txt | 3 + > drivers/clk/st/clk-flexgen.c | 367 +++++++++++++++++- > drivers/clk/st/clkgen-fsyn.c | 113 +++++- > drivers/clk/st/clkgen-pll.c | 121 +++++- > 6 files changed, 576 insertions(+), 41 deletions(-) > > --- Please don't do this triple dash. It made me have to run git am --skip on this mbox because git thought this was a patch. > v4: - add an additional CLK_IS_CRITICAL within flexgen driver > v3: - removal some useless CLK_IS_CRITICAL and add some comments > - only keep clk drivers/binding patches within the serie >
