Due to a limitation for USB DFU boot mode, SPL load address has to be less than or equal to 0x70001000. So, load address of SPL and ATF have been moved to 0x70000000 and 0x701a0000 respectively. Also, the maximum size of ATF has been increased to 0x1c000 [1]. Therefore, update ATF's location and maximum size accordingly in the device tree file. [1] - https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=2fb5312f61a7de8b7a70e1639199c4f14a10b6f9 Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> --- Link to corresponding U-Boot series that makes the ATF load address update, - https://patchwork.ozlabs.org/project/uboot/list/?series=247265 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index ca59d1f711f8..7ae28992097f 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -14,7 +14,7 @@ ranges = <0x0 0x00 0x70000000 0x200000>; atf-sram@0 { - reg = <0x0 0x1a000>; + reg = <0x1a0000 0x1c000>; }; }; -- 2.17.1
