On Thu, Apr 08, 2021 at 01:02:18PM +0200, Michael Walle wrote:
> While enabling EDAC support for the LS1028A it was discovered that the
> memory node has a wrong endianness setting as well as a wrong interrupt
> assignment. Fix both.
>
> This was tested on a sl28 board. To force ECC errors, you can use the
> error injection supported by the controller in hardware (with
> CONFIG_EDAC_DEBUG enabled):
>
> # enable error injection
> $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
> # flip lowest bit of the data
> $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo
>
> Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
Applied both, thanks.
