> Subject: Re: [PATCH V4 4/4] soc: imx: Add blk-ctl driver for i.MX8MM
>
> On 21-05-10 12:07:04, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add
> that
> > support in this driver.
> >
> > Reviewed-by: Abel Vesa <abel.vesa@xxxxxxx>
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> > drivers/soc/imx/Makefile | 2 +-
> > drivers/soc/imx/blk-ctl-imx8mm.c | 138
> > +++++++++++++++++++++++++++++++
> > 2 files changed, 139 insertions(+), 1 deletion(-) create mode 100644
> > drivers/soc/imx/blk-ctl-imx8mm.c
> >
> > diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index
> > d3d2b49a386c..c260b962f495 100644
> > --- a/drivers/soc/imx/Makefile
> > +++ b/drivers/soc/imx/Makefile
> > @@ -4,4 +4,4 @@ obj-$(CONFIG_ARCH_MXC) += soc-imx.o endif
> > obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> > obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> > -obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o
> > +obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o blk-ctl.o blk-ctl-imx8mm.o
> > diff --git a/drivers/soc/imx/blk-ctl-imx8mm.c
> > b/drivers/soc/imx/blk-ctl-imx8mm.c
> > new file mode 100644
> > index 000000000000..5ca8d6c52917
> > --- /dev/null
> > +++ b/drivers/soc/imx/blk-ctl-imx8mm.c
> > @@ -0,0 +1,138 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2021 NXP
> > + */
> > +
> > +#include <dt-bindings/clock/imx8mm-clock.h>
> > +#include <dt-bindings/power/imx8mm-power.h>
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/types.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "blk-ctl.h"
> > +
> > +#define MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN BIT(6)
> > +#define MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN BIT(5)
> > +#define MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN BIT(4)
> > +#define MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN
> BIT(3)
> > +#define MEDIA_BLK_CSI_BRIDGE_SFT_EN GENMASK(2,
> 0)
> > +
> > +#define MEDIA_BLK_BUS_PD_MASK BIT(12)
> > +#define MEDIA_BLK_MIPI_CSI_PD_MASK GENMASK(11,
> 10)
> > +#define MEDIA_BLK_MIPI_DSI_PD_MASK GENMASK(9,
> 8)
> > +#define MEDIA_BLK_LCDIF_PD_MASK GENMASK(7,
> 6)
> > +#define MEDIA_BLK_CSI_BRIDGE_PD_MASK GENMASK(5,
> 0)
> > +
> > +static struct imx_blk_ctl_hw imx8mm_dispmix_blk_ctl_pds[] = {
> > + IMX_BLK_CTL_PD("CSI_BRIDGE", "dispmix",
> IMX8MM_BLK_CTL_PD_DISPMIX_CSI_BRIDGE, 0x4,
> > + MEDIA_BLK_CSI_BRIDGE_PD_MASK, 0,
> MEDIA_BLK_CSI_BRIDGE_SFT_EN,
> > + IMX_BLK_CTL_PD_RESET),
> > + IMX_BLK_CTL_PD("LCDIF", "dispmix",
> IMX8MM_BLK_CTL_PD_DISPMIX_LCDIF, 0x4,
> > + MEDIA_BLK_LCDIF_PD_MASK, -1, -1, 0),
> > + IMX_BLK_CTL_PD("MIPI_DSI", "mipi",
> IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI, 0x4,
> > + MEDIA_BLK_MIPI_DSI_PD_MASK, 0,
> MEDIA_BLK_MIPI_DSI_I_PRESETN_SFT_EN,
> > + IMX_BLK_CTL_PD_RESET),
> > + IMX_BLK_CTL_PD("MIPI_CSI", "mipi",
> IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_CSI, 0x4,
> > + MEDIA_BLK_MIPI_CSI_PD_MASK, 0,
> > + MEDIA_BLK_MIPI_CSI_I_PRESETN_SFT_EN |
> MEDIA_BLK_CAMERA_PIXEL_RESET_N_SFT_EN,
> > + IMX_BLK_CTL_PD_RESET)
> > +};
> > +
> > +static struct imx_blk_ctl_hw imx8mm_vpumix_blk_ctl_pds[] = {
> > + IMX_BLK_CTL_PD("VPU_BLK_CTL_G2", "vpu-g2",
> IMX8MM_BLK_CTL_PD_VPU_G2, 0x4,
> > + BIT(0), 0, BIT(0), IMX_BLK_CTL_PD_RESET),
> > + IMX_BLK_CTL_PD("VPU_BLK_CTL_G1", "vpu-g1",
> IMX8MM_BLK_CTL_PD_VPU_G1, 0x4,
> > + BIT(1), 0, BIT(1), IMX_BLK_CTL_PD_RESET),
> > + IMX_BLK_CTL_PD("VPU_BLK_CTL_H1", "vpu-h1",
> IMX8MM_BLK_CTL_PD_VPU_H1, 0x4,
> > + BIT(2), 0, BIT(2), IMX_BLK_CTL_PD_HANDSHAKE |
> > +IMX_BLK_CTL_PD_RESET), };
> > +
> > +static const struct regmap_config imx8mm_blk_ctl_regmap_config = {
> > + .reg_bits = 32,
> > + .reg_stride = 4,
> > + .val_bits = 32,
> > + .max_register = 0x30,
> > + .fast_io = true,
> > +};
> > +
> > +static const struct imx_blk_ctl_dev_data
> imx8mm_vpumix_blk_ctl_dev_data = {
> > + .pds = imx8mm_vpumix_blk_ctl_pds,
> > + .pds_num = ARRAY_SIZE(imx8mm_vpumix_blk_ctl_pds),
> > + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL,
> IMX8MM_BLK_CTL_PD_VPU_H1, 0x4, BIT(2), 0, BIT(2),
> > + IMX_BLK_CTL_PD_HANDSHAKE),
> > + .config = imx8mm_blk_ctl_regmap_config,
> > + .active_pd_names = (char*[]){"vpumix", "g1", "g2", "h1"},
> > + .num_active_pd = 4,
> > +};
> > +
> > +static const struct imx_blk_ctl_dev_data
> imx8mm_dispmix_blk_ctl_dev_data = {
> > + .pds = imx8mm_dispmix_blk_ctl_pds,
> > + .pds_num = ARRAY_SIZE(imx8mm_dispmix_blk_ctl_pds),
> > + .hw_hsk = IMX_BLK_CTL_PD(NULL, NULL, -1, 0x4,
> MEDIA_BLK_BUS_PD_MASK, 0,
> > + MEDIA_BLK_BUS_RSTN_BLK_SYNC_SFT_EN,
> > + IMX_BLK_CTL_PD_HANDSHAKE |
> IMX_BLK_CTL_PD_RESET),
> > + .config = imx8mm_blk_ctl_regmap_config,
> > + .active_pd_names = (char*[]){"dispmix", "mipi"},
> > + .num_active_pd = 2,
> > +};
> > +
> > +static int imx8mm_blk_ctl_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + const struct imx_blk_ctl_dev_data *dev_data =
> of_device_get_match_data(dev);
> > + struct regmap *regmap;
> > + struct imx_blk_ctl *ctl;
> > + void __iomem *base;
> > +
> > + ctl = devm_kzalloc(dev, sizeof(*ctl), GFP_KERNEL);
> > + if (!ctl)
> > + return -ENOMEM;
> > +
> > + base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(base))
> > + return PTR_ERR(base);
> > +
> > + regmap = devm_regmap_init_mmio(dev, base, &dev_data->config);
> > + if (IS_ERR(regmap))
> > + return PTR_ERR(regmap);
> > +
> > + ctl->regmap = regmap;
> > + ctl->dev = dev;
> > + ctl->power_count = 0;
> > + mutex_init(&ctl->lock);
> > +
> > + ctl->num_clks = devm_clk_bulk_get_all(dev, &ctl->clks);
> > + if (ctl->num_clks < 0)
> > + return ctl->num_clks;
> > +
> > + dev_set_drvdata(dev, ctl);
> > + ctl->dev_data = dev_data;
> > +
> > + return imx_blk_ctl_register(dev);
> > +}
>
> Nitpick:
>
> Pretty sure all the other platforms will have a similar probe function.
> So maybe we can move this into the generic and call it imx8_blk_ctl_register
> and pass on the PDs, dev data and regmap_config.
>
> We could also do this later on when i.MX8MP variant will be done.
Let me do this later, I have started i.MX8MP part, and will use a generic
probe function.
Thanks,
Peng.
>
> > +
> > +static const struct of_device_id imx_blk_ctl_of_match[] = {
> > + { .compatible = "fsl,imx8mm-vpumix-blk-ctl", .data =
> &imx8mm_vpumix_blk_ctl_dev_data },
> > + { .compatible = "fsl,imx8mm-dispmix-blk-ctl", .data =
> &imx8mm_dispmix_blk_ctl_dev_data },
> > + { /* Sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, imx_blk_ctl_of_match);
> > +
> > +static struct platform_driver imx_blk_ctl_driver = {
> > + .probe = imx8mm_blk_ctl_probe,
> > + .driver = {
> > + .name = "imx8mm-blk-ctl",
> > + .of_match_table = of_match_ptr(imx_blk_ctl_of_match),
> > + .pm = &imx_blk_ctl_pm_ops,
> > + },
> > +};
> > +module_platform_driver(imx_blk_ctl_driver);
> > --
> > 2.30.0
> >
