From: Peng Fan <peng.fan@xxxxxxx> V4: Add R-b tag Typo fix Update the power domain macro names Per Abel and Frieder V3: Add explaination for not listing items in patch 2 commit log Per Rob. Addressed comments from Lucas and Frieder on patch [3,4]. A few comments from Jacky was ignored, because following gpcv2 coding style. V2: Fix yaml check failure. Previously there is an effort from Abel that take BLK-CTL as clock provider, but it turns out that there is A/B lock issue and we are not able resolve that. Per discuss with Lucas and Jacky, we made an agreement that take BLK-CTL as a power domain provider and use GPC's domain as parent, the consumer node take BLK-CTL as power domain input. This patchset has been tested on i.MX8MM EVK board, but one hack is not included in the patchset is that the DISPMIX BLK-CTL MIPI_M/S_RESET not implemented. Per Lucas, we will finally have a MIPI DPHY driver, so fine to leave it. Thanks for Lucas's suggestion, Frieder Schrempf for collecting all the patches, Abel's previous BLK-CTL work, Jacky Bai on help debug issues. Peng Fan (4): dt-bindings: power: Add defines for i.MX8MM BLK-CTL power domains Documentation: bindings: clk: Add bindings for i.MX BLK_CTL soc: imx: Add generic blk-ctl driver soc: imx: Add blk-ctl driver for i.MX8MM .../bindings/soc/imx/fsl,imx-blk-ctl.yaml | 66 ++++ drivers/soc/imx/Makefile | 2 +- drivers/soc/imx/blk-ctl-imx8mm.c | 138 ++++++++ drivers/soc/imx/blk-ctl.c | 307 ++++++++++++++++++ drivers/soc/imx/blk-ctl.h | 77 +++++ include/dt-bindings/power/imx8mm-power.h | 11 + 6 files changed, 600 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx-blk-ctl.yaml create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c create mode 100644 drivers/soc/imx/blk-ctl.c create mode 100644 drivers/soc/imx/blk-ctl.h -- 2.30.0
